Hello, Thanks for the reply. No I am not running the UIs in parallel. As you can see here in my config:
https://github.com/mgiaco/MiniKossel-CRAMPS I added a second ini for the axis UI with I can start without mklauncher. As you can see I use the new python interface for the Hal settings. So everything works with axis the only problem is that I didn't see the extruder because the handling seems to be different with the fdm way... But I would like to use machineface. So how do you manage the printing ... I mean after homing how do you move to the touch off position with a delta if you're not in teleop mode? With Midi? Oder do you use the exact zero point setting and so you do not need to jog. Sometimes I think I am the only guy how is trying to use machinekit for a delta. Do you think it is better to look for something else for printing with delta printers? Thanks for your help. Mathias -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
