Hi, Did the additional setting in Machineface work for you?
Regards, Alexander Am Mittwoch, 6. Juli 2016 18:00:28 UTC+2 schrieb Mathias Giacomuzzi: > > Hello, > > Thanks for the reply. No I am not running the UIs in parallel. As you > can see here in my config: > > https://github.com/mgiaco/MiniKossel-CRAMPS > > I added a second ini for the axis UI with I can start without mklauncher. > As you can see I use the new python interface for the Hal settings. So > everything works with axis the only problem is that I didn't see the > extruder because the handling seems to be different with the fdm way... > > But I would like to use machineface. So how do you manage the printing ... > I mean after homing how do you move to the touch off position with a delta > if you're not in teleop mode? > > With Midi? > > Oder do you use the exact zero point setting and so you do not need to > jog. > > Sometimes I think I am the only guy how is trying to use machinekit for a > delta. > > Do you think it is better to look for something else for printing with > delta printers? > > Thanks for your help. > Mathias > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
