1. there should be some error in linuxcnc logs? have you checked those? 2. dont know I run my machine over machinekit remote interface (haltalk) 3. there is a NO_FORCE_HOMING = 1 in [TRAJ] section in INI
regards Dne nedelja, 14. maj 2017 15.03.56 UTC+2 je oseba Simon Mali napisala: > > Dear all > After integrating BBB Machinekit into my CNC machine some problems came to > surface which I dont know how to solve: > > 1. Problems with executing some G code file. Both G code files are > attached. The problem seems to be the same for both files: while executing > the G code machine stops at G1 move, in both files at line N110. There > should be no problem with both files (g code) because when I am executing > it on my other machine (non LinucCNC, non BBB-machinekit) everything works > as expected. I have downloaded the latest application software with apt-get > dist. > > 2. Sometimes the screen resolution changes without the reason. I am > turning my machine down when all the blue LED diodes on BBB are off. How to > set this screen resolution to always high resolution? I mean when the > system boot up, usually after turn off, it boots in low resolution mode. > Then I make a restart and after that everything is ok, the system starts in > high resolution mode. > > 3. How to run the machine with G code without homeing it? > > I hope that somebody can help me with this questions > Best regards > Simon Mali > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
