You posted log from many different days... but looking at your log there is two lines for example:
May 13 17:39:26 beaglebone msgd:0: zeroconf: registered 'Log service on beaglebone.local pid 1402' _machinekit._tcp 0 TXT "uuid=a42c8c6b-4025-4f83- ba28-dad21114744a" "instance=581531b2-37f2-11e7-b18e-1cba8cd967d9" "service=log" "dsn=ipc:///tmp/0.log.a42c8c6b-4025-4f83-ba28-dad21114744a" May 13 18:13:30 beaglebone rtapi:0: unload: 'trivkins' not loaded So I am interested what was happening with machinekit in between of 17:39 minute to 18:13. Have you run axis or any other machinekit client at all? Have you run some gcode - if yes which one? regards On Thu, May 18, 2017 at 9:50 PM, Sag ich Dir nich <stevie.rammst...@live.de> wrote: > One problem i had was arcs over 400mm radius, i had to limit the arcs > under 400mm or the machine would just stop without any error > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the > Google Groups "Machinekit" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/machinekit/eiNtWf5MEsg/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.