I would just heat wrap them easy fix and cheeper then the ceramic coating.
--- "Terry & Heather" <[EMAIL PROTECTED]>
> wrote:
>Chris,
>
>Pass on the ceramic coating question.
>
>If your extractor pipe from #4 has the upwards bend in it have a trial fit
>before you cut anything, actually remove the heat shield from the manifold
>and with the carbie fitted to the manifold check that the rearward SD
>Hitachi fuel bowl will clear the header as some of these early bread of
>headers made in Australia were designed for Hitachi 2bbl & Weber 32/36 and
>some are even OK with a single side draft eg Genie & Sonic.
>
>H&M21C are a good quality locally made header and are OK for twins (either
>Hitachi SD or Weber)
>
>
>regards
>
>Terry
>
>-----Original Message-----
>From: Chris Halpin [mailto:[EMAIL PROTECTED]]
>Sent: Sunday, 25 June 2000 6:51 AM
>To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
>Subject: ceramic coating
>
>
>hey peoples, is it possible to get only one exhaust manifold (the one
>comeing off #4 cylinder ceramic coated? and if so how much would I be
>looking at? I have genie extractors, and am just about to replace the
>single hitachi with my twin SU's, but the manifold rises before it drops,
>meaning I'm going to have to cut the heat shield on the carby to fit the
>inlet manifold around the exhaust manifold. now that was one long sentance.
> so cutting the heat shield, will make the carby heat up, becasue this
>troublesome # four extractor rises that much. I don't even think I could
>fit a cold box in there - damn!!
>thanks - chris
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
>This message comes to you from the Datsun 510 mailing list.
>List rules and instructions are available at:
>http://bluebirds.datsun510.com/bluebirds/listcharter
>Authors retain implicit copyright to their material. Obtain
>permission from the author before redistributing messages.
>
>
_____________________________________________________________
Get Your free Ozdat Email Account
---> http://www.ozdat.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
