Adam, is this heat wrapping redily accessible, and where from? thanks
chris
>From: Adam Rowe <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Re: ceramic coating
>Date: Sat, 24 Jun 2000 22:35:57 +1000
>
>I used heat wrapping on my extractors and it made a huge difference. I can
>now
>adjust my timing without using gloves, and my electronic igniton works.
>
>Rick White wrote:
>
> > I would just heat wrap them easy fix and cheeper then the ceramic
>coating.
> >
> > --- "Terry & Heather" <[EMAIL PROTECTED]>
> > > wrote:
> > >Chris,
> > >
> > >Pass on the ceramic coating question.
> > >
> > >If your extractor pipe from #4 has the upwards bend in it have a trial
>fit
> > >before you cut anything, actually remove the heat shield from the
>manifold
> > >and with the carbie fitted to the manifold check that the rearward SD
> > >Hitachi fuel bowl will clear the header as some of these early bread of
> > >headers made in Australia were designed for Hitachi 2bbl & Weber 32/36
>and
> > >some are even OK with a single side draft eg Genie & Sonic.
> > >
> > >H&M21C are a good quality locally made header and are OK for twins
>(either
> > >Hitachi SD or Weber)
> > >
> > >
> > >regards
> > >
> > >Terry
> > >
> > >-----Original Message-----
> > >From: Chris Halpin [mailto:[EMAIL PROTECTED]]
> > >Sent: Sunday, 25 June 2000 6:51 AM
> > >To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> > >Subject: ceramic coating
> > >
> > >
> > >hey peoples, is it possible to get only one exhaust manifold (the one
> > >comeing off #4 cylinder ceramic coated? and if so how much would I be
> > >looking at? I have genie extractors, and am just about to replace the
> > >single hitachi with my twin SU's, but the manifold rises before it
>drops,
> > >meaning I'm going to have to cut the heat shield on the carby to fit
>the
> > >inlet manifold around the exhaust manifold. now that was one long
>sentance.
> > > so cutting the heat shield, will make the carby heat up, becasue this
> > >troublesome # four extractor rises that much. I don't even think I
>could
> > >fit a cold box in there - damn!!
> > >thanks - chris
> >
> >________________________________________________________________________
> > >Get Your Private, Free E-mail from MSN Hotmail at
>http://www.hotmail.com
> > >
> > >
> > >This message comes to you from the Datsun 510 mailing list.
> > >List rules and instructions are available at:
> > >http://bluebirds.datsun510.com/bluebirds/listcharter
> > >Authors retain implicit copyright to their material. Obtain
> > >permission from the author before redistributing messages.
> > >
> > >
> >
> > _____________________________________________________________
> > Get Your free Ozdat Email Account
> > ---> http://www.ozdat.com
> >
>
>--
>
>Adam Rowe
><[EMAIL PROTECTED]>
>
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
