Rick,
Have you (or anyone else) had any experience with or used heat wrap lately?
The stuff that was around in the olden days that we used prolly had asbestos
in it that wouldn't be acceptable today and even then it only sort off
worked OK. I was just wondering if the modern stuff you see advertised in
the local car mags is good value for money, does the job? etc.
terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Rick White
Sent: Saturday, 24 June 2000 9:30 PM
To: [EMAIL PROTECTED]
Subject: RE: ceramic coating
I would just heat wrap them easy fix and cheeper then the ceramic coating.
--- "Terry & Heather" <[EMAIL PROTECTED]>
> wrote:
>Chris,
>
>Pass on the ceramic coating question.
>
>If your extractor pipe from #4 has the upwards bend in it have a trial fit
>before you cut anything, actually remove the heat shield from the manifold
>and with the carbie fitted to the manifold check that the rearward SD
>Hitachi fuel bowl will clear the header as some of these early bread of
>headers made in Australia were designed for Hitachi 2bbl & Weber 32/36 and
>some are even OK with a single side draft eg Genie & Sonic.
>
>H&M21C are a good quality locally made header and are OK for twins (either
>Hitachi SD or Weber)
>
>
>regards
>
>Terry
>
>-----Original Message-----
>From: Chris Halpin [mailto:[EMAIL PROTECTED]]
>Sent: Sunday, 25 June 2000 6:51 AM
>To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
>Subject: ceramic coating
>
>
>hey peoples, is it possible to get only one exhaust manifold (the one
>comeing off #4 cylinder ceramic coated? and if so how much would I be
>looking at? I have genie extractors, and am just about to replace the
>single hitachi with my twin SU's, but the manifold rises before it drops,
>meaning I'm going to have to cut the heat shield on the carby to fit the
>inlet manifold around the exhaust manifold. now that was one long
sentance.
> so cutting the heat shield, will make the carby heat up, becasue this
>troublesome # four extractor rises that much. I don't even think I could
>fit a cold box in there - damn!!
>thanks - chris
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
>This message comes to you from the Datsun 510 mailing list.
>List rules and instructions are available at:
>http://bluebirds.datsun510.com/bluebirds/listcharter
>Authors retain implicit copyright to their material. Obtain
>permission from the author before redistributing messages.
>
>
_____________________________________________________________
Get Your free Ozdat Email Account
---> http://www.ozdat.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
