I used heat wrapping on my extractors and it made a huge difference. I can now
adjust my timing without using gloves, and my electronic igniton works.
Rick White wrote:
> I would just heat wrap them easy fix and cheeper then the ceramic coating.
>
> --- "Terry & Heather" <[EMAIL PROTECTED]>
> > wrote:
> >Chris,
> >
> >Pass on the ceramic coating question.
> >
> >If your extractor pipe from #4 has the upwards bend in it have a trial fit
> >before you cut anything, actually remove the heat shield from the manifold
> >and with the carbie fitted to the manifold check that the rearward SD
> >Hitachi fuel bowl will clear the header as some of these early bread of
> >headers made in Australia were designed for Hitachi 2bbl & Weber 32/36 and
> >some are even OK with a single side draft eg Genie & Sonic.
> >
> >H&M21C are a good quality locally made header and are OK for twins (either
> >Hitachi SD or Weber)
> >
> >
> >regards
> >
> >Terry
> >
> >-----Original Message-----
> >From: Chris Halpin [mailto:[EMAIL PROTECTED]]
> >Sent: Sunday, 25 June 2000 6:51 AM
> >To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> >Subject: ceramic coating
> >
> >
> >hey peoples, is it possible to get only one exhaust manifold (the one
> >comeing off #4 cylinder ceramic coated? and if so how much would I be
> >looking at? I have genie extractors, and am just about to replace the
> >single hitachi with my twin SU's, but the manifold rises before it drops,
> >meaning I'm going to have to cut the heat shield on the carby to fit the
> >inlet manifold around the exhaust manifold. now that was one long sentance.
> > so cutting the heat shield, will make the carby heat up, becasue this
> >troublesome # four extractor rises that much. I don't even think I could
> >fit a cold box in there - damn!!
> >thanks - chris
> >________________________________________________________________________
> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
> >
> >This message comes to you from the Datsun 510 mailing list.
> >List rules and instructions are available at:
> >http://bluebirds.datsun510.com/bluebirds/listcharter
> >Authors retain implicit copyright to their material. Obtain
> >permission from the author before redistributing messages.
> >
> >
>
> _____________________________________________________________
> Get Your free Ozdat Email Account
> ---> http://www.ozdat.com
>
--
Adam Rowe
<[EMAIL PROTECTED]>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
