Terry,
I priced a new KB10 brake master cylinder this morning, its was over
$400 new from nissan (ouch!), Unfortunately Repco don't stock them either
(not even rebuild kits) so I'm going to try a either dual cylinder Nabco
180B (or perhaps Stanza), like you have suggested, they should be plentiful
and cheap. I am converting to a disc brake front end shortly, so the extra
size may be useful.
Thanks,
James.
> James,
>
> These days you are better off replacing it unless the bore is in good
> condition and the kit is a reasonable price; the latter I have found over
> the past couple of years not to be the case. The other option is to get
> another cylinder roughly the same. The Nabco dual cylinder for a B10 is
> 11/16" but a 3/4" off a 180B should work OK.
>
> regards
> Terry
>
>
> -----Original Message-----
> Subject: slippery floor
>
>
> My 1000's brake master cylinder is leaking brake fluid down the inside of
> the firewall, Its got 2 fluid resevoir's and the rear one is empty.. So
its
> obviously coming from there. Are these master cylinders re-buildable, or
am
> I better off replacing it..
>
> James.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
