James,
These days you are better off replacing it unless the bore is in good
condition and the kit is a reasonable price; the latter I have found over
the past couple of years not to be the case. The other option is to get
another cylinder roughly the same. The Nabco dual cylinder for a B10 is
11/16" but a 3/4" off a 180B should work OK.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of james empson
Sent: Friday, 4 May 2001 4:15
To: [EMAIL PROTECTED]
Subject: slippery floor
My 1000's brake master cylinder is leaking brake fluid down the inside of
the firewall, Its got 2 fluid resevoir's and the rear one is empty.. So its
obviously coming from there. Are these master cylinders re-buildable, or am
I better off replacing it..
James.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
