I hadn't hear of that swap...
What's the difference btwn the boxes?
Cam
----- Original Message -----
From: "tod matthiesson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 08, 2001 4:28 PM
Subject: Re: front end (long)
> Damien
> Yeah sounds like that is the go with my setup too, and yes i've seen that
> Whiteline article wouldnt mind spending that much dosh on the
suspension(if
> i had it to spare:) The 120y steering box works great compared to my
sloppy
> 1600 one, has made highway driving much smoother without having to corect
> direction every 200meters. The install requires u to remove the arm off
the
> 1600 steering box and install it on the 120y box due to the 120y ball
socket
> being too small for the 1600 steering linkage. I had to take both boxes
to
> a engineering workshop to get the arms off as they were very siezed into
> place cost me 20 bucks, take care when swapping the arms making sure the
arm
> goes back at the same angle otherwise your steering will not be centred.
> But once this is done its a direct bolt up and make sure u put some torque
> into the mounting bolts for obvious reasons....Tod
>
> 71 white 4dr
> L18 Su's 5 speed
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
