RE: L/Z conversion

[Terry Rudd]

Dave,   A U67 and a Z18ET head have exactly the same chamber volume i.e. 45.2cc so the compression ratio would be all but the same (allow small variance due to head gasket thickness, shaves etc) CR of L20B varies from 8.2:1 to 9.2:1 depending on year - Black top S2 Bluebird is the highest.   regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Monday, 7 January 2002 7:35 PM To: Ozdat Mailing List Subject: L/Z conversion guys what compression ratio would you end up with if you put a Z18ET head on an L20B or Z20 bottom end?   is either block stronger? the L20 or the Z20?   could I get enough shaved off the top of the L20 pistons to use the Z18 head?   Dave --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------