Just drill the biggest hole you can and use the biggest ezy-out possible and it shouldn`t break.
Kris. ----- Original Message ----- From: "Mark Alford" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 06, 2002 8:54 AM Subject: Re: broken screw > I'll second that. I broke a bolt last year on my engine and proceeded to get > myself a set of easy outs. Everything was fine until the easy out snapped > inside the bolt, this led to some very colourful language coming from my > garage, and a trip to my engine builder to fix the problem. His sarcastic > comment was that you should require a licence to use easy outs. > > They can work, but they can also cause bigger problems, just be careful. > > Mark. > > ----- Original Message ----- > From: "maldat" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, June 05, 2002 6:22 PM > Subject: Re: broken screw > > > > ezyout is the common name ,but they arnt as good as they are made out to > > be, you have to be bloody carefull you dont break it.cos then the job is > > wicked. > > Sometimes you R better off just to drill it out bigger and helcoil it. > > > > Malcolm > > > > Bob wrote: > > > > > Hello Mark, > > > > > > I have only tackled that problem once, but I got one of those easy > > > outs from autopro for about $4 and that got it out like a charm - the > > > only problem I had is they have a really small drive on the back, > > > looks like 1/16th or something, but vice grips make do. Apparently > > > giving it a bit of a whack in the centre with a centre punch or > > > something like that can help loosen them up (not enough to damage it > > > thought). > > > > > > Wednesday, June 05, 2002, 3:33:19 PM, you wrote: > > > > > > MF> Hi listers, > > > > > > MF> I have struck a small problem with my L20B. One of the holes in the > block where the engine mounts bolt into has half a screw in there but the > head has snapped off. It is too far in to grip, so i > > > MF> was going to try to drill a hole in the screw and reverse thread it > to get it out but i thought i'd ask if anyone had any good tricks for > getting them out first. Any suggestions? > > > > > > MF> Thanks, > > > MF> Mark. > > > > > > MF> _____________________________________________________________ > > > MF> Get Your free Ozdat Email Account > > > --->> http://www.ozdat.com > > > > > > MF> _____________________________________________________________ > > > MF> Promote your group and strengthen ties to your members with > [EMAIL PROTECTED] by Everyone.net http://www.everyone.net/?btn=tag > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
