Some Datsun wrecker once told me that a Diahatsu Mira fuel tank will fit inside the spare wheel well of a 510 quite nicely. Sounds like a good idea but I'd say the tank would be less than a datto in volume. Maybe making it a long-range backup tank could be an idea for those extra long trips.Any lister actually tried a Mira tank?
Rob P ----- Original Message ----- From: "Brad Hallett" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 04, 2002 9:24 AM Subject: RE: Strut brace works for me! Rear strut brace is essential if you fit coil overs, but need aluminium fuel tank fitted to spare wheel well so it can fit straight bewteen shock towers Cheers Brad > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:membersozdat_owner@;datascribe.com.au] > Sent: Friday, 1 November 2002 10:56 PM > To: [EMAIL PROTECTED] > Subject: RE: Strut brace works for me! > > Rear strut brace on a 1600? How bizarre, not necessary with the stock fuel > tank and IMHO about as useful as ... well you know. The 1600/180B/710 tank > in it's original position with mounting hardware is integral to the rear > suspension design. Now Zeds, 200B, 910, etc that's a whole different > story as the rear towers float all over the place on them. Interestingly, > Stanzas are built the same way as the 1600. > > Cam (hope your bar does well in the US) > On the subject of tower braces, have you thought of offering a steering > box brace with your bar. On the track, you'll notice scrutineering will > pay particular attention to the steering box and idler arm bushes and > mounting points when they spot the brace. It seems that a lot of the > stress is moved downwards when a brace in is place and adjusted correctly. > Also, ppl have a tendency to over tighten them - not necessary. Around > 15-20lbs was recommended by Nissan for the genuine bar on a 1600 from > memory in my day. > > regards > Terry > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:membersozdat_owner@;datascribe.com.au]On Behalf Of Rob P > Sent: Friday, 1 November 2002 10:40 PM > To: [EMAIL PROTECTED] > Subject: Re: Strut brace works for me! > > > Cam, > Keep up the good work mate. > I've actually seen a home-made REAR strut brace that was made of > rectangular > hollow section (RHS) and went over the top of the fuel tank and then down > each side. > It might be overkill and not worth the extra weight The rear of a 1600 is > probably a whole lot stiffer than the front which has to enclose the whole > engine bay as a large void. > I thought it might be ideal to make one that can > use the top of it as rollcage mounting points. > Btw I think 4-point rollcages are legal for street use here in WA? > Do any listers know if this is true? > > Rob P > ----- Original Message ----- > From: "Cam McKinnon" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, November 01, 2002 7:05 PM > Subject: Re: Strut brace works for me! > > > > Thanks for the great feedback Rob :) > > > > Everyone who has taken one has been happy so it's good to here it worked > out > > for you as well. > > > > I've just sent two to the US, it'd be nice to see an aussie strut brace > take > > off over there! > > > > Cheers, > > > > Cam > > CM510 > > www.sprite.com.au/cm510 > > > > ----- Original Message ----- > > From: "Rob P" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, November 01, 2002 9:42 PM > > Subject: Strut brace works for me! > > > > > > > Cam, > > > Thanks for the custom strut brace, I can actually feel quite a > difference > > in > > > rigidity of the bodywork on my stock 1600 with worn suspension - the > > shocks > > > are like bike pumps (might have to try refilling the shocks with > > motorcycle > > > fork oil, motor oil, tranny oil...... or choc milk -ha ha, seems like > > > opinions differ :P ). It also looks pretty sweet too! Now to upgrade > the > > > rest of the suspension $$$.... > > > > > > Rob P > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@;datascribe.com.au/ ---------------------------------------------------------------------
