the 3 wires for the hall effect sensor are just for power, ground and output. mark k
----- Original Message ----- From: "David Andrews" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, February 23, 2003 1:21 PM Subject: Re: no ignition/injector pule :( > The FJ20 CAS is used for just that, all it does is tell the ecu where the > crank is at. Now my autronic has several options for this, hall-effect > sensor distributor, OEM CAS, or optical CAS. I believe you can tell if > the Z18ET is a hall-effect type by seeing if it has three wires come out > of it. In either case, as Zac said, you'll need to get into the ecu and > tell it its using a hall-effect dizzy. > > I don't know about the microtech (georgie?), but the autronic manual says > that you should manually rotate the dizzy 60 degrees BTDC, buggered if i > know why. Consult ze manuel. > Cheers, > > Dave > > >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<< > > On 2/23/03, 1:32:45 AM, "Zac Campbell" <[EMAIL PROTECTED]> wrote regarding > Re: no ignition/injector pule :(: > > > > yeha you will need to configure the microtech to suit whatever crank > angle > > sensor you are using with your Z18ET. > > > ----- Original Message ----- > > From: "Cameron Stean" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, February 22, 2003 8:34 PM > > Subject: no ignition/injector pule :( > > > > > I have struck another problem with the project :/ > > everything is wired up, no errors in the ecu error log, but when I go to > > start... no ignition pulse/injector pulse... I've checked all the wires > but > > hav'nt found "the" problem, I'm running a microtech mtx-8 with haltech > hec > > twin ignitor and 2 twin spark coil packs... the previous owner was > running a > > FJ20 C.A.S and I'm running the sensor in the stock Z18 distributor.. > would > > the settings in the ecu conflict? > > > anybody had this problem? any ideas what it could be? > > > dont really want to take it to mazfix to get fixed if i can do it myself > and > > save alot of money... > > > thanks for any info > > > Cameron > > > > _________________________________________________________________ > > MSN Instant Messenger now available on Australian mobile phones. Go to > > http://ninemsn.com.au/mobilecentral/hotmail_messenger.asp > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
