> >Such a board would be WAY too expensive for it's functionality.
>
> Of course. I think the best solution would be a more complex cartridge
> including a MIC IN apart from other goodies. A simple stereo ADC/DAC
> sampler/player with a MIC IN and a couple of LINE IN sockets, for example.
>
> They became very popular, very simple (and very cheap!) for Atari ST and
> Amiga. They were mostly parallel port based, but since the MSX printer
port
> is output only they cannot be used in this computer.
Yes, yes!!! Cool!!!
A device with MIC in, Line in and line out, which has a chrystal inside
(which can handle all frequencies from about 200 to 48000 MHz), and a 16-bit
ADC and DAC, so I can play AND record samples and I can play WAV-files
larger than 128k (that's the limit of 16-bit samples on the MoonSound).
Too bad DMA isn't possible on MSX... would be ideal.
~Grauw
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
