There are many different versions of these cards and therefore different 
ways the IN-28s are hooked up, just google "ИН-28" and look at the images. 
Some are meant to be driven from unsmoothed full wave rectified mains 
voltage, some from smoothed DC-voltage, some have a simplified circuit 
without using the Grid-electrode and some use the Grid-electrode for 
switching ON and switches the Anode and/or Cathode to turn OFF.

The IN-28 works as a trigger tube.

The IN-28 can be driven from full wave rectified unsmoothed 220VAC mains 
voltage, it is mentioned in the three page datasheet found here: 
https://www.istok2.com/data/1732/, and on a few Russian websites, and uses 
the grid-electrode as a trigger electrode for switching on and the zero 
voltage crossing from the unsmoothed voltage across Anode-Cathode to 
extinguish it - a common way of igniting and extinguishing a trigger tube. 
The Anode-resistor must be selected properly for unsmoothed AC for proper 
glow and ignition to limit the current correctly - also described in the 
datasheet.

In this thread (in Russian, one of the google hits from the search above) 
you'll see a schematic at the end for a simplified circuit: 
https://radiokot.ru/forum/viewtopic.php?f=3&t=107510 , there the 
grid-electrode is hooked up via a high value resistor (2.2Meg) to the 
unsmoothed full wave rectified voltage which turns the IN-28 on when its 
cathode is grounded via the transistor (KT940A - High voltage transistor, 
datsheet here: https://alltransistors.com/transistor.php?transistor=39593, 
similar to MJE350 I guess).

I like the description from the datasheet:

"Glow Discharge Indicator IN-28 Designed for building light-information 
systems of mass warning, manufactured for the needs of the national economy.
"

The price on some Russian websites for a full digit is sometimes as low as 
USD $3!

/Martin


-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/0f5701b7-813b-412a-afa3-cdd10f73d274o%40googlegroups.com.

Reply via email to