Just got the first batch of 2... exactly like the ones Paul got. 2 more on
their way.

On Thu, Aug 27, 2020, 9:30 AM Paul Andrews <[email protected]> wrote:

> Power requirements are quite extreme, at least compared with what we might
> all be used to. When I tested my first board I drove it at 240V and it drew
> around 230mA with all tubes lit. So for my four board clock I needed to
> provide around 1A at 240V. My boards have 27 tubes, so it takes around 9mA
> per tube. You can multiply it out.
>
> The obvious route in the UK, as Martin has said, is to use a mains driven
> power supply with a full wave rectifier. In the U.S. you would have to use
> a step-up transformer to get this. I didn't want my clock tethered to a
> step-up transformer - I wanted it to have everything it needed in whatever
> housing I came up with and I didn't want a heavy transformer in there, so I
> went with a stack of five of these power supplies
> <https://www.trcelectronics.com/View/Mean-Well/LPV-60-48.shtml> wired in
> series, giving me exactly 240V DC.
>
> If you have access to the trigger pin of the tubes, you can just keep it
> at the anode voltage and then you can drive the tubes like regular nixies -
> pull the cathode to the ground and it lights up. Let it float and it goes
> out. Obviously you need a resistor between the trigger pin and the HV. My
> boards already have this.
>
> On Thursday, August 27, 2020 at 8:55:44 AM UTC-4, M1 wrote:
>>
>> Richard,
>>
>>
>>
>> Sorry, I just ordered them.
>>
>> “Estimated delivery *Thursday, Oct 1, 2020* *- Thursday, Oct 29, 2020”*
>>
>>
>>
>> I’m pretty sure you already know what I am going to make with them.
>>
>> Now, I am thinking of ordering more.  😊
>>
>>
>>
>> I see a few of us have got them already.   What power supply are you guys
>> using?   I’ll need to drive 8 of them.
>>
>>
>>
>> Michail Wilson
>>
>> 206-920-6312
>>
>>
>>
>> *From:* [email protected] <[email protected]> *On Behalf
>> Of *Richard Scales
>> *Sent:* Monday, August 24, 2020 8:44 PM
>> *To:* neonixie-l <[email protected]>
>> *Subject:* Re: [neonixie-l] Re: 7 Segment Nix
>>
>>
>>
>> Michail, I would be interested to find out how you get on with these - do
>> you have them yet?
>>
>> I have some here and they are quite different from the ones that Paul
>> has, there is a daughter board on the rear of the unit which actually
>> appears to do very little, the board has a lot of tracks for components
>> that are not fitted.
>> Apart from that, there are three connections to each IN-28, one is common
>> to all tubes, one is common to all tubes but fed via a large resistor and
>> the third is common to each 'segment' and these are the ones which go to
>> the daughter board and then off to the edge of the main board.
>> - Richard
>>
>>
>>
>> On Monday, 24 August 2020 at 18:38:32 UTC+1 M1 wrote:
>>
>> 8 @ $30
>>
>>
>>
>> Michail Wilson
>>
>> 206-920-6312
>>
>>
>>
>> *From:* [email protected] <[email protected]> *On Behalf
>> Of *Christian Elzey
>> *Sent:* Monday, August 24, 2020 10:33 AM
>> *To:* [email protected]
>> *Subject:* Re: [neonixie-l] Re: 7 Segment Nix
>>
>>
>>
>> How low was your low offer? Wondering if I could go lower...
>>
>>
>>
>> On Mon, Aug 24, 2020, 1:32 PM Michail Wilson <[email protected]> wrote:
>>
>> Hello,
>>
>>
>>
>> I decided to get several of these as well.
>>
>>
>>
>> I made a LOW bid offer and it was accepted minutes later.
>>
>>
>>
>> Michail Wilson
>>
>> 206-920-6312
>>
>>
>>
>> *From:* [email protected] <[email protected]> *On Behalf
>> Of *Richard Scales
>> *Sent:* Saturday, August 22, 2020 9:45 PM
>> *To:* neonixie-l <[email protected]>
>> *Subject:* [neonixie-l] Re: 7 Segment Nix
>>
>>
>>
>> I also bagged a few of these on a low(ish) offer and they just arrived.
>> They were extremely well packaged - I think I'm OK for bubble wrap for
>> quite some time now.
>> No idea how to drive/interface/connect/power, there is a smaller daughter
>> board on the back of the main PC. The 'segments' are clearly arranged and I
>> am guessing that there are 7 individually addressable segments that are
>> individually addressable.
>> All pointers and suggestions gleefully received.
>>
>> I look forward to hearing what you make of them Chris.
>>
>> - Richard
>>
>>
>>
>>
>>
>> On Saturday, 22 August 2020 at 11:11:11 UTC+1 Dekatron42 wrote:
>>
>> This display was discussed here on the forum a few weeks ago:
>> https://groups.google.com/forum/#!topic/neonixie-l/bVoCKhPv7Dg the tubes
>> are IN-28 single dot nixies for large displays. These displays were
>> supposedly used in the Russian metro and other places. It also turned up in
>> the game Metro Exodus which I wrote about here:
>> https://groups.google.com/forum/#!searchin/neonixie-l/in-28%7Csort:date/neonixie-l/S4Evx0_z3ak/WE3e6tqSAAAJ
>> .
>>
>>
>>
>> There have been at least two large "clocks" with four of these displays
>> with a large metal front sold on ebay over the years, I asked the seller
>> about those and I was told that they didn't have the "clock" electronics so
>> you had to drive them yourself, perhaps they were slave units hooked up to
>> a master clock. The clock has been discussed here on the forum too (I
>> didn't read through that thread now):
>> https://groups.google.com/forum/#!searchin/neonixie-l/in-28|sort:date/neonixie-l/PC8pHxmTWSg/74pk9tloBwAJ,
>> maybe the thread shows if it contained the clock electronics or not.
>>
>>
>>
>> /Martin
>>
>>
>> On Thursday, 20 August 2020 16:17:38 UTC+2, martin martin wrote:
>>
>> Not my listing.  Looks interesting
>>
>>
>> https://www.ebay.com/itm/PCB-with-23-pieces-IN-28-nixie-tubes-slightly-used-working/114333271792?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225086%26meid%3D49761308ecd441a998590284c2ed34f5%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D114333271792%26itm%3D114333271792%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Ac5551501-e2ef-11ea-8536-74dbd180e220%7Cparentrq%3A0c3a9e6a1740a6881cb64927ffffee54%7Ciid%3A1
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "neonixie-l" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web, visit
>> https://groups.google.com/d/msgid/neonixie-l/fde962cf-11d9-47ea-811c-e5757ccf5464n%40googlegroups.com
>> <https://groups.google.com/d/msgid/neonixie-l/fde962cf-11d9-47ea-811c-e5757ccf5464n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "neonixie-l" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/neonixie-l/cVHd2j26I10/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected].
>> To view this discussion on the web, visit
>> https://groups.google.com/d/msgid/neonixie-l/MW2PR0102MB343543C3F25B96D78E67A03D82560%40MW2PR0102MB3435.prod.exchangelabs.com
>> <https://groups.google.com/d/msgid/neonixie-l/MW2PR0102MB343543C3F25B96D78E67A03D82560%40MW2PR0102MB3435.prod.exchangelabs.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "neonixie-l" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
>> To view this discussion on the web, visit
>> https://groups.google.com/d/msgid/neonixie-l/CADjEcqCZnymU3ZWHnuWrbHtzfZb7j1aVnMNYUPuLYOtA5xQJpw%40mail.gmail.com
>> <https://groups.google.com/d/msgid/neonixie-l/CADjEcqCZnymU3ZWHnuWrbHtzfZb7j1aVnMNYUPuLYOtA5xQJpw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "neonixie-l" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web, visit
>> https://groups.google.com/d/msgid/neonixie-l/68cde36c-dc59-498e-a385-63fd9663e32en%40googlegroups.com
>> <https://groups.google.com/d/msgid/neonixie-l/68cde36c-dc59-498e-a385-63fd9663e32en%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "neonixie-l" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/neonixie-l/cVHd2j26I10/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To view this discussion on the web, visit
> https://groups.google.com/d/msgid/neonixie-l/6f15663a-34fa-4528-a0bd-26e538237072o%40googlegroups.com
> <https://groups.google.com/d/msgid/neonixie-l/6f15663a-34fa-4528-a0bd-26e538237072o%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/CADjEcqCYN-iP5PzzAKtsGDC8647ijcV1QhAis2gFDp_aL%2BEKFQ%40mail.gmail.com.

Reply via email to