Disclaimer: Operating off the mains without isolation requires a lot of 
extra care and attention to safety. I've done several designs this way 
with  no problem. When in doubt, ask someone on this forum.

A voltage doubler off the mains will work nicely; I did that in my first 
nixie clock 10 years ago and it's still working fine. You have to be 
careful to limit the inrush current and add surge-protection (varistor AND 
fuse) to protect the electrolytic caps. That will get you 340V, so there 
will be wasted energy (heat).

If you want 260 VDC from the US mains (120V), you can also use a "boost" 
transformer to add about 65VAC to the 120VAC line. I've used that technique 
with smaller transformers to get +200VDC and +215VDC on different projects.



On Thursday, August 27, 2020 at 6:30:08 AM UTC-7 Paul Andrews wrote:

> Power requirements are quite extreme, at least compared with what we might 
> all be used to. When I tested my first board I drove it at 240V and it drew 
> around 230mA with all tubes lit. So for my four board clock I needed to 
> provide around 1A at 240V. My boards have 27 tubes, so it takes around 9mA 
> per tube. You can multiply it out.
>
> The obvious route in the UK, as Martin has said, is to use a mains driven 
> power supply with a full wave rectifier. In the U.S. you would have to use 
> a step-up transformer to get this. I didn't want my clock tethered to a 
> step-up transformer - I wanted it to have everything it needed in whatever 
> housing I came up with and I didn't want a heavy transformer in there, so I 
> went with a stack of five of these power supplies 
> <https://www.trcelectronics.com/View/Mean-Well/LPV-60-48.shtml> wired in 
> series, giving me exactly 240V DC.
>
> If you have access to the trigger pin of the tubes, you can just keep it 
> at the anode voltage and then you can drive the tubes like regular nixies - 
> pull the cathode to the ground and it lights up. Let it float and it goes 
> out. Obviously you need a resistor between the trigger pin and the HV. My 
> boards already have this.
>
> On Thursday, August 27, 2020 at 8:55:44 AM UTC-4, M1 wrote:
>
>> Richard,
>>
>>  
>>
>> Sorry, I just ordered them.
>>
>> “Estimated delivery *Thursday, Oct 1, 2020* *- Thursday, Oct 29, 2020”*
>>
>>  
>>
>> I’m pretty sure you already know what I am going to make with them.
>>
>> Now, I am thinking of ordering more.  😊
>>
>>  
>>
>> I see a few of us have got them already.   What power supply are you guys 
>> using?   I’ll need to drive 8 of them.
>>
>>  
>>
>> Michail Wilson
>>
>> 206-920-6312 <(206)%20920-6312>
>>
>>  
>>
>> *From:* [email protected] <[email protected]> *On Behalf 
>> Of *Richard Scales
>> *Sent:* Monday, August 24, 2020 8:44 PM
>> *To:* neonixie-l <[email protected]>
>> *Subject:* Re: [neonixie-l] Re: 7 Segment Nix
>>
>>  
>>
>> Michail, I would be interested to find out how you get on with these - do 
>> you have them yet? 
>>
>> I have some here and they are quite different from the ones that Paul 
>> has, there is a daughter board on the rear of the unit which actually 
>> appears to do very little, the board has a lot of tracks for components 
>> that are not fitted.
>> Apart from that, there are three connections to each IN-28, one is common 
>> to all tubes, one is common to all tubes but fed via a large resistor and 
>> the third is common to each 'segment' and these are the ones which go to 
>> the daughter board and then off to the edge of the main board.
>> - Richard
>>
>>  
>>
>> On Monday, 24 August 2020 at 18:38:32 UTC+1 M1 wrote:
>>
>> 8 @ $30
>>
>>  
>>
>> Michail Wilson
>>
>> 206-920-6312
>>
>>  
>>
>> *From:* [email protected] <[email protected]> *On Behalf 
>> Of *Christian Elzey
>> *Sent:* Monday, August 24, 2020 10:33 AM
>> *To:* [email protected]
>> *Subject:* Re: [neonixie-l] Re: 7 Segment Nix
>>
>>  
>>
>> How low was your low offer? Wondering if I could go lower...
>>
>>  
>>
>> On Mon, Aug 24, 2020, 1:32 PM Michail Wilson <[email protected]> wrote:
>>
>> Hello,
>>
>>  
>>
>> I decided to get several of these as well.
>>
>>  
>>
>> I made a LOW bid offer and it was accepted minutes later.
>>
>>  
>>
>> Michail Wilson
>>
>> 206-920-6312
>>
>>  
>>
>> *From:* [email protected] <[email protected]> *On Behalf 
>> Of *Richard Scales
>> *Sent:* Saturday, August 22, 2020 9:45 PM
>> *To:* neonixie-l <[email protected]>
>> *Subject:* [neonixie-l] Re: 7 Segment Nix
>>
>>  
>>
>> I also bagged a few of these on a low(ish) offer and they just arrived. 
>> They were extremely well packaged - I think I'm OK for bubble wrap for 
>> quite some time now.
>> No idea how to drive/interface/connect/power, there is a smaller daughter 
>> board on the back of the main PC. The 'segments' are clearly arranged and I 
>> am guessing that there are 7 individually addressable segments that are 
>> individually addressable.
>> All pointers and suggestions gleefully received.
>>
>> I look forward to hearing what you make of them Chris.
>>
>> - Richard
>>
>>  
>>
>>  
>>
>> On Saturday, 22 August 2020 at 11:11:11 UTC+1 Dekatron42 wrote:
>>
>> This display was discussed here on the forum a few weeks ago: 
>> https://groups.google.com/forum/#!topic/neonixie-l/bVoCKhPv7Dg the tubes 
>> are IN-28 single dot nixies for large displays. These displays were 
>> supposedly used in the Russian metro and other places. It also turned up in 
>> the game Metro Exodus which I wrote about here: 
>> https://groups.google.com/forum/#!searchin/neonixie-l/in-28%7Csort:date/neonixie-l/S4Evx0_z3ak/WE3e6tqSAAAJ
>> .
>>
>>  
>>
>> There have been at least two large "clocks" with four of these displays 
>> with a large metal front sold on ebay over the years, I asked the seller 
>> about those and I was told that they didn't have the "clock" electronics so 
>> you had to drive them yourself, perhaps they were slave units hooked up to 
>> a master clock. The clock has been discussed here on the forum too (I 
>> didn't read through that thread now): 
>> https://groups.google.com/forum/#!searchin/neonixie-l/in-28|sort:date/neonixie-l/PC8pHxmTWSg/74pk9tloBwAJ,
>>  
>> maybe the thread shows if it contained the clock electronics or not.
>>
>>  
>>
>> /Martin
>>
>>
>> On Thursday, 20 August 2020 16:17:38 UTC+2, martin martin wrote:
>>
>> Not my listing.  Looks interesting
>>
>>
>> https://www.ebay.com/itm/PCB-with-23-pieces-IN-28-nixie-tubes-slightly-used-working/114333271792?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225086%26meid%3D49761308ecd441a998590284c2ed34f5%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D114333271792%26itm%3D114333271792%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Ac5551501-e2ef-11ea-8536-74dbd180e220%7Cparentrq%3A0c3a9e6a1740a6881cb64927ffffee54%7Ciid%3A1
>>   
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "neonixie-l" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>> To view this discussion on the web, visit 
>> https://groups.google.com/d/msgid/neonixie-l/fde962cf-11d9-47ea-811c-e5757ccf5464n%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/neonixie-l/fde962cf-11d9-47ea-811c-e5757ccf5464n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "neonixie-l" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/neonixie-l/cVHd2j26I10/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to 
>> [email protected].
>> To view this discussion on the web, visit 
>> https://groups.google.com/d/msgid/neonixie-l/MW2PR0102MB343543C3F25B96D78E67A03D82560%40MW2PR0102MB3435.prod.exchangelabs.com
>>  
>> <https://groups.google.com/d/msgid/neonixie-l/MW2PR0102MB343543C3F25B96D78E67A03D82560%40MW2PR0102MB3435.prod.exchangelabs.com?utm_medium=email&utm_source=footer>
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "neonixie-l" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>>
>> To view this discussion on the web, visit 
>> https://groups.google.com/d/msgid/neonixie-l/CADjEcqCZnymU3ZWHnuWrbHtzfZb7j1aVnMNYUPuLYOtA5xQJpw%40mail.gmail.com
>>  
>> <https://groups.google.com/d/msgid/neonixie-l/CADjEcqCZnymU3ZWHnuWrbHtzfZb7j1aVnMNYUPuLYOtA5xQJpw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "neonixie-l" group.
>>
> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>>
>
>> To view this discussion on the web, visit 
>> https://groups.google.com/d/msgid/neonixie-l/68cde36c-dc59-498e-a385-63fd9663e32en%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/neonixie-l/68cde36c-dc59-498e-a385-63fd9663e32en%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/965021b1-e988-4da6-b4b0-0be57875cd36n%40googlegroups.com.

Reply via email to