Dimming like I suggested only works with unsmoothed half/fullwave rectified 
AC, not with DC, there you'll have to pulse drive them with a transistor or 
something similar.

/Martin

On Friday, 28 August 2020 15:35:00 UTC+2, Bill Notfaded wrote:
>
> So perhaps dimming by just lowering the DC voltage from 240V may work?  I 
> think, if I'm not mistaken, I read somewhere they were originally powered 
> with unsmoothed half wave rectified mains in Russia.  I'll look into the 
> idea Paul had to put some of those 48V in series.  It looks like five is 
> almost perfect for 1A draw from the PS in series.
>
> Bill
>
> On Thursday, August 27, 2020 at 11:10:42 AM UTC-7 Dekatron42 wrote:
>
>> I don't know much about dimming these but some of the earliest dimming 
>> solutions for Nixies that I've seen actually used diac/triac/thyristors 
>> with unsmoothed half- or fullwave rectified mains voltage, and also some 
>> transistorized solutions.
>>
>> Maybe something similar could be used here, they either controlled the 
>> anode voltage before the anode resistor or affected the voltage after the 
>> anode resistor, right at the anode of the Nixie, by lowering it to get a 
>> dimming effect. Much like a triac/diad dimmer does affect the mains voltage.
>>
>> /Martin
>>
>> On Thursday, 27 August 2020 19:56:25 UTC+2, Paul Andrews wrote:
>>>
>>> If we assume that these panels are designed to run off full-wave 
>>> rectified 220V, perhaps here in the U.S. a Villard voltage doubler 
>>> <https://www.intechopen.com/books/advanced-electronic-circuits-principles-architectures-and-applications-on-emerging-technologies/high-voltage-energy-harvesters>
>>>  
>>> would work? OTH, if you want to be able to dim/fade these panels, you would 
>>> probably want a DC voltage. It seems like there would be no point PWMing at 
>>> a few kHz on top of a 50/60Hz wave.
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/e0e71ead-f9da-45ec-8f95-be4ccd66867co%40googlegroups.com.

Reply via email to