So perhaps dimming by just lowering the DC voltage from 240V may work?  I 
think, if I'm not mistaken, I read somewhere they were originally powered 
with unsmoothed half wave rectified mains in Russia.  I'll look into the 
idea Paul had to put some of those 48V in series.  It looks like five is 
almost perfect for 1A draw from the PS in series.

Bill

On Thursday, August 27, 2020 at 11:10:42 AM UTC-7 Dekatron42 wrote:

> I don't know much about dimming these but some of the earliest dimming 
> solutions for Nixies that I've seen actually used diac/triac/thyristors 
> with unsmoothed half- or fullwave rectified mains voltage, and also some 
> transistorized solutions.
>
> Maybe something similar could be used here, they either controlled the 
> anode voltage before the anode resistor or affected the voltage after the 
> anode resistor, right at the anode of the Nixie, by lowering it to get a 
> dimming effect. Much like a triac/diad dimmer does affect the mains voltage.
>
> /Martin
>
> On Thursday, 27 August 2020 19:56:25 UTC+2, Paul Andrews wrote:
>>
>> If we assume that these panels are designed to run off full-wave 
>> rectified 220V, perhaps here in the U.S. a Villard voltage doubler 
>> <https://www.intechopen.com/books/advanced-electronic-circuits-principles-architectures-and-applications-on-emerging-technologies/high-voltage-energy-harvesters>
>>  
>> would work? OTH, if you want to be able to dim/fade these panels, you would 
>> probably want a DC voltage. It seems like there would be no point PWMing at 
>> a few kHz on top of a 50/60Hz wave.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/d529285a-39cc-4ae6-a1b2-7280753850f8n%40googlegroups.com.

Reply via email to