Matt
When this has occurred on our Elite, the problem has been with the patch bay
points for the modified master insert points.
But I think you need to expand on what happened when you put in the ATR-100.
Was is direct wired to the patchbay and perhaps the master section wiring
has been disturbed?
Good luck.
Neil Thomason
www.headgap.com.au
----- Original Message -----
From: "Matt Walsh" <[email protected]>
To: <[email protected]>
Sent: Tuesday, June 23, 2009 7:47 AM
Subject: NEOTEK: Imbalance in Series II Master
Hi Neotrekkies:
My S2 is having a weird problem. The left side is 3 or 4 db lower than
the right side. I tested this in several different ways and the
conclusion is inescapable.
What could be the problem? I remember when Greg Norman from Electrical
Audio was working on our board he repunched (punch block repunched)
individual multitrack channels and that solved a similar problem.
Could the same have happened due to the installation of our ATR-100?
If not, how should I look for the issue.
Best,
Matt
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message
body. If you have any difficulties, or questions --please send an email to
mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
