Hi Matt,
I owned a Series 2 that developed a similar problem. It's been quite
a few years, but I think my tech traced it to the switch in the
master section that mutes everything except the reverb returns......I
can't remember exactly what that switch was labeled, though. I think
a good cleaning, or maybe just exercising it cleared it up.
Hope that helps!
Chris Magruder
Thundering Sky Recording
On Jun 22, 2009, at 5:47 PM, Matt Walsh wrote:
Hi Neotrekkies:
My S2 is having a weird problem. The left side is 3 or 4 db lower than
the right side. I tested this in several different ways and the
conclusion is inescapable.
What could be the problem? I remember when Greg Norman from Electrical
Audio was working on our board he repunched (punch block repunched)
individual multitrack channels and that solved a similar problem.
Could the same have happened due to the installation of our ATR-100?
If not, how should I look for the issue.
Best,
Matt
------
View the list online at: http://www.mail-archive.com/
[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions --please
send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
