yes
-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Greg Norman
Sent: Thursday, November 03, 2011 11:05 PM
To: [email protected]
Subject: Re: NEOTEK: Cleaning Pots on Neotek Elite
Did my last post go through?
Greg Norman
On Nov 3, 2011, at 8:15 PM, Casey Rice wrote:
Might want to do the DC thing and exercise each pot vigorously before
deciding to use cleaner.
Casey
On 04/11/2011, at 11:54 AM, Jim Mikles wrote:
In addition to cleaning, you may also need to null out the dc across
the pot. This dc varies as the gain pot is rotated causing noise. On the
Series 1 there is a trimpot for this, I assume the Elite is similar, but I
don't have a schematic.
Jim Mikles
On 11/3/2011 8:35 PM, Andrew Nast wrote:
We have a Neotek Elite we recently installed, and every mic pre pot
is super scratchy. I did some quick research, and bought two products;
Deoxit Fader F5, and Deoxit Gold G5. Should I use both, or one of these
products? Any tips on this procedure? I figure I need to pull each module
and spray it in from the underneath. Going to wait for someones 2 cents
before proceeding. Thanks in advance!!
Andrew
The Decibel Garden
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the message
body. If you have any difficulties, or questions --please send an email to
mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any
message or reply sent to the list will be automatically forwarded to all
subscribers.
Vive Le Neotek!
Thanks.
Casey Rice
PO Box 423
Yarraville VIC 3013
+61 4 2367 2340
