If I remember correctly.. I think the gain pots are 2 section.. One section is reverse taper from the other. If you spray the wrong cleaner or damage them in any way it is going to be very hard to find a replacement part.
Greg Dwinell -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Casey Rice Sent: Thursday, November 03, 2011 9:15 PM To: [email protected] Subject: Re: NEOTEK: Cleaning Pots on Neotek Elite Might want to do the DC thing and exercise each pot vigorously before deciding to use cleaner. Casey On 04/11/2011, at 11:54 AM, Jim Mikles wrote: In addition to cleaning, you may also need to null out the dc across the pot. This dc varies as the gain pot is rotated causing noise. On the Series 1 there is a trimpot for this, I assume the Elite is similar, but I don't have a schematic. Jim Mikles On 11/3/2011 8:35 PM, Andrew Nast wrote: We have a Neotek Elite we recently installed, and every mic pre pot is super scratchy. I did some quick research, and bought two products; Deoxit Fader F5, and Deoxit Gold G5. Should I use both, or one of these products? Any tips on this procedure? I figure I need to pull each module and spray it in from the underneath. Going to wait for someones 2 cents before proceeding. Thanks in advance!! Andrew The Decibel Garden ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks. Casey Rice PO Box 423 Yarraville VIC 3013 +61 4 2367 2340
