[nlug] Re: Linksys WRT54G into switch / WiFi access point

Tue, 18 Aug 2009 08:10:41 -0700

Jim Peterson wrote:
We have a WRT54G2, the no-external-antenna black box one. It does just fine that way. No DHCP, and just set to the default gateway for that network segment.
   Is this the area that I am screwed up on?
 Setup
   Advanced Routing
       Operating Mode = Routing.
       Dynamic Routing = Disabled(?)





On Tue, 2009-08-18 at 09:30 -0500, Perkins, Jerry wrote: 
I have a number Linksys WRT54Gs router / WiFi units.
   Would like to turn off the DHCP, hence turning these boxes into a 
switch / access point for the network.   From what I understand you can 
not do that with the standard firmware , but it is possible with Tomato.
   Am I on the right track?

    

-- 
Jerry Perkins - http://jperkins.us/

There are 10 kinds of people in the world 
   - those who understand binary and those who don't.

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "NLUG" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/nlug-talk?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to