Is this router directly connected to an Internet feed or behind a cable
or DSL modem? 


On Tue, 2009-08-18 at 11:09 -0500, Perkins, Jerry wrote:

> Jim Peterson wrote: 
> 
> > Ours is set to Gateway mode and dynamic routing is off.
> 
>    When I set: [Setup] > [Advanced Routing] > [Operating Mode] =
> Gateway, the [Dynamic Routing] is removed.
>    And then I can not connect.
> 
> 
> 
> 
> > 
> > On Tue, 2009-08-18 at 10:04 -0500, Perkins, Jerry wrote:
> > 
> > > Jim Peterson wrote: 
> > > 
> > > > We have a WRT54G2, the no-external-antenna black box one. It
> > > > does just fine that way. No DHCP, and just set to the default
> > > > gateway for that network segment.
> > > 
> > >    Is this the area that I am screwed up on? 
> > > 
> > > Setup
> > >    Advanced Routing
> > >        Operating Mode = Routing.
> > >        Dynamic Routing = Disabled(?)
> > >     
> > > 
> > > 
> > > 
> > > 
> > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > On Tue, 2009-08-18 at 09:30 -0500, Perkins, Jerry wrote: 
> > > > 
> > > > > I have a number Linksys WRT54Gs router / WiFi units.
> > > > >    Would like to turn off the DHCP, hence turning these boxes into a 
> > > > > switch / access point for the network.   From what I understand you 
> > > > > can 
> > > > > not do that with the standard firmware , but it is possible with 
> > > > > Tomato.
> > > > >    Am I on the right track?
> > > > > 
> > > > >     
> > > > >         
> > > 
> > > 
> > > 
> > > -- 
> > > Jerry Perkins - http://jperkins.us/
> > > 
> > > There are 10 kinds of people in the world 
> > >    - those who understand binary and those who don't.
> > > 
> > >     
> > > 
> > > 
> > > 
> > 
> > 
> > 
> 
> 
> 
> 
> -- 
> Jerry Perkins - http://jperkins.us/
> 
> There are 10 kinds of people in the world 
>    - those who understand binary and those who don't.
> 
> 
> 
> > 

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"NLUG" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nlug-talk?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to