Ours is set to Gateway mode and dynamic routing is off. Jim
On Tue, 2009-08-18 at 10:04 -0500, Perkins, Jerry wrote: > Jim Peterson wrote: > > > We have a WRT54G2, the no-external-antenna black box one. It does > > just fine that way. No DHCP, and just set to the default gateway for > > that network segment. > > Is this the area that I am screwed up on? > > Setup > Advanced Routing > Operating Mode = Routing. > Dynamic Routing = Disabled(?) > > > > > > > > > > > > > On Tue, 2009-08-18 at 09:30 -0500, Perkins, Jerry wrote: > > > > > I have a number Linksys WRT54Gs router / WiFi units. > > > Would like to turn off the DHCP, hence turning these boxes into a > > > switch / access point for the network. From what I understand you can > > > not do that with the standard firmware , but it is possible with Tomato. > > > Am I on the right track? > > > > > > > > > > -- > Jerry Perkins - http://jperkins.us/ > > There are 10 kinds of people in the world > - those who understand binary and those who don't. > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "NLUG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nlug-talk?hl=en -~----------~----~----~----~------~----~------~--~---
