Interesting development. I was looking at the pin out on the tweet to see whether it use JTAG or SWD. All I can find is USB, so no guidance there. Either signals can be routed through USB I believe. I know JTAG can, but my limited knowledge means I am not sure about SWD.
From: Antonio Borneo <born...@users.sourceforge.net> Sent: Friday, March 10, 2023 7:08 AM To: openocd-devel@lists.sourceforge.net Subject: [openocd:tickets] #378 SWD support for RISCV artchitecture One update on the (almost off-topic) discussion started with this ticket "Allwinner R128 wireless SoC features 64-bit RISC-V core, Arm Cortex-M33 core, and HiFi 5 audio DSP" https://www.cnx-software.com/2023/03/06/allwinner-r128-wireless-soc-features-64-bit-risc-v-core-arm-cortex-m33-core-and-hifi-5-audio-dsp/ While the article reports a SoC with Risc-V + Cortex-M33, I think this should be a dual silicon chips in a single package because I don't believe the same technology can fit for both 800MHz CPU and WiFi/BT radio. For me the Cortex-M33 is in the same chip with the WiFi/BT, while Risc-V and the other digital functions are in another chip. Anyway, some hybrid is popping out. ________________________________ [tickets:#378]<https://sourceforge.net/p/openocd/tickets/378/> SWD support for RISCV artchitecture Status: new Milestone: 0.10.0 Labels: openocd Created: Wed Dec 28, 2022 07:00 AM UTC by Ashi Gupta Last Updated: Sat Jan 07, 2023 11:34 AM UTC Owner: nobody Hi, I want to know if SWD debug support has been added for RISCV architecture in openocd ? So far i know that JTAG support is only available. If not any plans in doing so ? ________________________________ Sent from sourceforge.net because openocd-devel@lists.sourceforge.net<mailto:openocd-devel@lists.sourceforge.net> is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list. --- ** [tickets:#378] SWD support for RISCV artchitecture** **Status:** new **Milestone:** 0.10.0 **Labels:** openocd **Created:** Wed Dec 28, 2022 07:00 AM UTC by Ashi Gupta **Last Updated:** Thu Mar 09, 2023 11:08 PM UTC **Owner:** nobody Hi, I want to know if SWD debug support has been added for RISCV architecture in openocd ? So far i know that JTAG support is only available. If not any plans in doing so ? --- Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.