Hi,

[Working on the assumption that SWD is Serial Wire Debugging, not Single Wire 
Debugging. There is a reference for the latter when I did a goggle search]

Second Tommy's observation that there is no SWD access to RISC-V. I do not 
remember recalling any mention of SWD in the RISC-V Debug Specification.

Also, pardon my ignorance, I do not remember ARM making it available as 
international standard or take any steps to license it to other device 
manufacturers not using ARM's ISA. If I am correct, then RISC-V-based device 
will not be able to use it. I am saying this because this can be the second 
reason why SWD is not supported for RISC-V device in OpenOCD, i.e. not possible 
to get any RISC-V hard or soft IP  that uses SWD.

Happy New Year.

Cinly

From: Tommy Murphy <tm1...@users.sourceforge.net>
Sent: Friday, December 30, 2022 2:06 AM
To: openocd-devel@lists.sourceforge.net
Subject: [openocd:tickets] Re: #378 SWD support for RISCV artchitecture


FWIW, Some Microchip FPGAs/SoC FPGAs can support hard and/or soft IP Cortex-M 
and RISC-V CPUs. But my recollection (from working for Microchip in the past) 
is that neither supported SWD. Certainly there is no SWD debug access to the 
RISC-V.

________________________________

[tickets:#378]<https://sourceforge.net/p/openocd/tickets/378/> SWD support for 
RISCV artchitecture

Status: new
Milestone: 0.10.0
Labels: openocd
Created: Wed Dec 28, 2022 07:00 AM UTC by Ashi Gupta
Last Updated: Thu Dec 29, 2022 05:20 PM UTC
Owner: nobody

Hi,

I want to know if SWD debug support has been added for RISCV architecture in 
openocd ? So far i know that JTAG support is only available. If not any plans 
in doing so ?

________________________________

Sent from sourceforge.net because 
openocd-devel@lists.sourceforge.net<mailto:openocd-devel@lists.sourceforge.net> 
is subscribed to https://sourceforge.net/p/openocd/tickets/

To unsubscribe from further messages, a project admin can change settings at 
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a 
mailing list, you can unsubscribe from the mailing list.


Reply via email to