Hi Bob, We have more or less this exact setup, 2 x Christie Mirage HD3's, Quadro 5600 and Nuvision 60GX shutter glasses on a 160 degree curved screen. Once the correct parameters are declared we have has no problems running in Quad buffer stereo with OSG. The only issue we have encountered has been with occasional swapping of left and right that we have isolated to the less than stellar drivers Nvidia have been releasing of late.
cheers Jon Frauciel Luc wrote: >> -----Message d'origine----- >> De : [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] De la >> part de Jean-Sébastien Guay >> Envoyé : mercredi 23 avril 2008 15:39 >> À : OpenSceneGraph Users >> Objet : [osg-users] Active stereo support in OSG? >> >> Hi everyone, >> > Hi Jean-Sebastian > > >> I'd like to ask if anyone has experience using active stereo >> with OSG. >> To be more precise, the hardware we're looking to use is >> >> Mirage HD3K projector >> nVidia Quadro FX 5600 video card >> nuvision emitters and 60GX LCD shutter glasses >> >> > > I work with nVidia Quadro FX 5600 and nuvision emitters and 60GX LCD shutter > glasses on a daily basis. > OSG will work out of the box in QUAD_BUFFER mode. > The only thing you'll have to do is to declare some parameters to adjust > stereo with the geometry of your projector : > See : > http://www.openscenegraph.org/projects/osg/wiki/Support/UserGuides/StereoSettings > > OSG_STEREO ON Turn stereo on > OSG_STEREO_MODE QUAD_BUFFER Use quad buffered stereo when in stereo. > OSG_SCREEN_DISTANCE 0.50 Set the distance the viewer is from screen in > metres (default shown) > OSG_SCREEN_HEIGHT 0.26 Set the height of image on the screen in metres > (default shown) > OSG_SCREEN_WIDTH 0.325 Set the width of image on the screen in > metres (default shown) > OSG_EYE_SEPARATION 0.06 Set the eye separation - interoccular distance > (default shown.) > > And that should be ok for the OSG side. > On the hardware side, you'll have to connect cables :D and check the stereo > enable box in the nvidia settings panel. > > You should have the same result than with anaglyphic stereo (a better result > in fact). > > Luc > > >> Now, I think this setup requires (and supports) quad-buffer >> stereo. And I think I saw that OSG supports that >> out-of-the-box. Does it work well? >> Any issues setting it up? Any gotchas on the OSG side? >> >> One problem we have is that the hardware is off-site (*far* >> off-site), and it's unlikely we'll have access to it for >> testing. We just have regular GeForce 8800 cards and regular >> monitors here. Should I expect it to "just work"(tm) ? Is >> there a way I can do some useful testing here? >> Perhaps using anaglyphic stereo with red/cyan glasses, (we have those >> :-) - will that be representative of the quad-buffer stereo support? >> >> Thanks in advance, >> >> J-S >> -- >> ______________________________________________________ >> Jean-Sebastien Guay [EMAIL PROTECTED] >> http://www.cm-labs.com/ >> http://whitestar02.webhop.org/ >> _______________________________________________ >> osg-users mailing list >> [email protected] >> http://lists.openscenegraph.org/listinfo.cgi/osg-users-opensce >> negraph.org >> >> > ********************************************************************************************** > > Pensez à l'environnement avant d'imprimer ce message > Think Environment before printing > > Le contenu de ce mél et de ses pièces jointes est destiné à l'usage exclusif > du (des) destinataire(s) désigné > (s) > comme tel(s). > En cas de réception par erreur, le signaler à son expéditeur et ne pas en > divulguer le contenu. > L'absence de virus a été vérifiée à l'émission, il convient néanmoins de > s'assurer de l'absence de > contamination à sa réception. > > The contents of this email and any attachments areconfidential. They are > intended for the named recipient > (s) > only. > If you have received this email in error please notifythe system manager or > the sender immediately and do > not > disclose the contents to anyone or make copies. > eSafe scanned this email for viruses, vandals and malicious content. > > ********************************************************************************************** > > _______________________________________________ > osg-users mailing list > [email protected] > http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org > -- Jon Newell Lead Developer VRS Unit 4, 19 Musgrave St, West End, Queensland, 4101 Mob 0421 979 810 Ph (07) 3846 5066 Fax (07) 3255 3530 _______________________________________________ osg-users mailing list [email protected] http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
