Ok, I put a jumper on the Active Termination pins. I boot up from the CD and I get the happy mac BUT it just freezes after that. I've even pressed the CUDA button several times. Any idea what is going on?
on 11/25/02 11:09 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote: > It has something to do with SCSI. I believe termination power is not > really termination, so you need the last device on the chain/cable to > provide termination power and have a terminator on the next connector, > which would be the last one in the chain. > > I'm not 100% sure what the proper settings would be, but I can tell you > your problem is related to SCSI termination. > > >>> As you said I jumpered Parity 0 1 and Term Pwr. > ... >>> I also have the termination power enabled jumpered. > ... >>> I get a happy face but that's it. It just freezes after that > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
