THanks for your response. I didn't get any software with the card (bought if off Ebay). Do I just look for "cache software for the Sonnet G3 300 MHZ processor)? Once I find it, do I need to physically do anything to the computer or just install the software?
Thanks again, Monique > From: macwarrior <[EMAIL PROTECTED]> > > Make sure the cache software for the processor card is installed and > configured. > > Running MacOSX is possible on the 7500 using XPost but i would not > recommended it for anything beyond casual use and definitely not any > production work. You can use your G3 processor, a G4 will work better. > You will need at least 256MB of RAM but over 512MBs is recommended. > Your video card may also need upgrading. > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
