My just-acquired 9600 came with an Applevision 1710 monitor that has an ADB pigtail on the connector. When I first fired it up it worked fine, then I changed to a higher resolution and the screen went black. I can't can't seem to get it to work right now. If I boot with the ADB connector plugged in, the screen stays black. It goes through the boot process and all, but I get no picture. If I power the monitor on and off from the front panel after it's booted and the screen is black, I can see a momentary flicker of the desktop when I flick the monitor on and off, but can't get it to stick on. If I boot up with the ADB connector unplugged I can get an image, but only at 640 x 480 resolution.
Any thoughts on how to proceed? Steve __________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
