Clint, It has no balls, Ed ----- Original Message ----- From: "[EMAIL PROTECTED] -Clint Hamilton" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, February 25, 2002 3:25 AM Subject: Re: PCWorks: Logitech cordless mouse
> Ed, How could it have an IR signal if it was corded? > -Clint > > God Bless Us All > Clint Hamilton, Owner > http://OrpheusComputing.com > http://ComputerHardware-ConsumerElectronics.com > ----- Original Message ----- > From: "Ed Gibbs" <[EMAIL PROTECTED]> > > > > Clint, My corded Intellimouse developed the jerkiness when it > was about, perhaps 2-years old. I decided it was probably in > the Infrared signal and replaced it with an Intellimouse > Explorer 3.0 > model and it works just fine. > > Ed > > ----- Original Message ----- > From: "Peter Kaulback" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, February 24, 2002 6:46 AM > Subject: Re: PCWorks: Logitech cordless mouse > > > Clint, I've never had a problem in having the tray icon > turned off on > either win98SE or win2k and I'm still using 9.24. I tried my > neighbor's > cordless MS Intellimouse and it took the jerkiness to a new > level, > something I didn't see with their standard Intellimouse. > > Peter Kaulback > > In the hour of 04:03 AM 2/24/2002 -0600, > [EMAIL PROTECTED] > -Clint Hamilton spoke this: > >FYI, the software that came > >with this 'cordless mouseman pro' I use now, is screwed up. > >Just like 'mouseware' versions after 8.0 (for their other > >cordless balled models), there is no way of removing the > >mouse icon from the sys tray. EVEN AFTER you uncheck the > box > >in it's properties, it remains when you restart. With my > >other Logitech cordless mouse I had to stay with V8.0. > >(versions after 8.0 to 9. [something] had this problem). > >With the new one, it has to use a different type of software > >and version since it's a totally different mouse. It came > >with 9.28 and it was plagued by the same problem. I tried > >v9.4 (I think it is) from their site, and it worked ok. ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
