Sounds like he didn't re-install Service Pack 6. All those things he mentioned are included with that if I remember correctly (Hole size editor and Designator positioning anyway)...
TC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Harry Selfridge Sent: Thursday, 14 April 2005 8:36 AM To: Protel EDA Discussion List Subject: Re: [PEDA] Netlist Import / Wanted: P99SE Hi Dennis, I can confirm that he is wrong. None of the problems he cites exist on my WinXP Pro (SP2+all patches to date) installation of 99SE. If he is really having all those problems, he may be running WinXP home edition or he has some installation problem peculiar to his system. 99SE is very stable under WinXP Pro - at least it has been for me. Regards - Harry At 01:21 PM 4/13/05, you wrote: >can others confirm what Soren said here re problems 99SE & WINXP-SP2 ? > >i thought others have said it works fine > >we use WIN2K > >Dennis Saputelli > >_______________________________________________________________________ >Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 >2851 21st Street Fax: 415-647-3003 >San Francisco, CA 94110 www.integratedcontrolsinc.com > > >sja wrote: > Hello Steve >>The easy thing for you is to have your customer get hold of a P99SE >>schematic. It give you the advantage to have better error handling when >>you update the PCB from the schematic editor, than using the importing >>net list feature. It also makes it possible for you to put in landmark >>(footprints) into the schematic. >>But one thing to make clear is who is in charge of the net list, e.g. if >>you are making the net list the responsibility changes, there are no >>clear limit between you and the customer. My experience is that making >>the customer aware of the landmark problem he is force to take more >>aspects into account. Like a D-SUB25 has two extra holes for mounting are >>they connected? Or where is pin 1 on a square flat pack in the corner or >>in the middle on one side. >>You can not hide your error on the finished PCB, so better to have your >>customer do them. >>Another thing is editing a net list in notepad is not fun. >>But P99SE is not the future, if you are going for Windows XP SP2 you will >>lose some thing in P99SE. Hole editor will disappear, moving designator >>automatically will disappear and adding to a selection is not possible. >>If you run remote desktop at the same time of P99SE it will fail. >>regards >>Soren Andersen > >____________________________________________________________ >You are subscribed to the PEDA discussion forum > >To Post messages: >mailto:[email protected] > >Unsubscribe and Other Options: >http://techservinc.com/mailman/listinfo/peda_techservinc.com > >Browse or Search Old Archives (2001-2004): >http://www.mail-archive.com/[email protected] >Browse or Search Current Archives (2004-Current): >http://www.mail-archive.com/[email protected] ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected] ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
