On Thursday, June 12, 2003, at 07:25 PM, David Townend wrote:
I've downloaded the latest versions of the upgrade of the upgraded EpsonThis is unlikely, but I suppose possible, lots of people have reported no great shifts with installing later drivers. You may have just to find out which pre-set that you previously specified has been re-set to a default by the install.
Driver (and of course all my profiles are now useless !).
I've tried and installed both... and can see no references in the installedI think you are just going to have to get the Rota-trim out.
software to the 'improvements' the software is meant to give (edge to edge
printing from the software on the Australian site)
.Leads me to beleif that the installers made a cock up with bits of 'old' and<snip>
bits of 'new' software on my system.
AFAIC tell most of the problems reported are to do with the way OSX prints. The Epson controls are less important and the OSX more so than under OS9. It is possible to center prints under OSX (have a look in the archive) it is just less obvious because you set up custom paper sizes in the OSX part of it and ignore the pre-sets in the Epson part.God ! Mac OS 9 was a breeze in comparason ? Just roll your sleeves and get right in there !
Once set up properly, printing to a 1290 is as easy as printing in OS9 IMHO. I wouldn't personally try printing edge to edge in either 9 or 10. Life is shortened enough by getting ink off rollers without actually inviting a spray-fest in there.
Matthew Ward
=============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
