Shangara, I've never seen this as a symptom of head failure, so do not panic. Sounds like a shop trying to get you to buy another printer to me (wouldn't be the first time I've seen that happen either)
Kind regards Matt Littler Technical Sales Executive Nova Darkroom and Permajet http://www.novadarkroom.com http://www.permajet.com Photokina - Germany 2004 Hall 14.2 Stand KO71 -----Original Message----- From: Shangara Singh Subject: Re: [PRODIG] Epson 1290 with CIS printing problems It was 21/9/04 11:05 am, when matthew ward wrote: > The most plausible explanation I managed to get (can' t remember where > from) was that the electronics in the head were fried and parts of it > were not bothering to drop ink whilst it traversed, but dumping > everything at the end. Matthew As I didn't have this problem before fitting the CIS, I am hoping it was caused by the ink tray being set too high for the head's liking. I have raised the printer and am hoping that has solved the problem. =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
