The individual signal lines should be labeled
with  AD0 to AD15  ie without the paranthesis.


Dipl. Ing. J rg Guttmann
eMail: [EMAIL PROTECTED]
===================================================
Visit our Web Site:   http://www.imar-navigation.de
===================================================
iMAR GmbH
Gesellschaft f r inertiale Mess-, Automatisierungs- und Regelsysteme
Systems for Inertial Measuring, Automation and Control
Schlackenbergstrasse 41
D-66386  St. Ingbert / Germany

Tel.: +49-(0)6894-9657-34
Fax : +49-(0)6894-9657-22


----- Original Message -----
From: "Tim Fifield" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Wednesday, January 30, 2002 5:21 PM
Subject: Re: [PEDA] Warning: Unconnected net label


> The bottom left corner of the net name is touching the bus it
> applies to.
>
> The individual signals are labeled where they break out of
> the bus as AD[0] thru AD[15]
>
> Tim
>
> -----Original Message-----
> From: Peter Bennett [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 30, 2002 11:52 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Warning: Unconnected net label
>
>
> Tim Fifield wrote:
> >
> > I get a "Warning: Unconnected net label on net ..." when I run ERC in
the
> > Sch editor. I'm trying to label a bus line with a the following net
label
> > AD[15..0]
> > How do I resolve this warning?
> >
>
> The bottom left corner of the net name must touch the wire or bus it
> applies to.
>
> Do you have all the individual signals labelled where they break out of
> the bus?
>
>
> --
> Peter Bennett
> TRIUMF
> 4004 Wesbrook Mall, Vancouver, BC, Canada
> GPS and NMEA info and programs:
> http://vancouver-webpages.com/peter/index.html
>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to