Dennis, I am using File->Exit. The sounds are enabled and tested. Maybe my installation is buggy. :)
Igor -----Original Message----- From: Dennis Saputelli [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 10 September 2002 1:23 AM To: Protel EDA Forum Subject: Re: [PEDA] Whats wrong with this picture. i dusted off an old machine using File eXit 99SE klunks on Win98 (big X upper right does not) Protel 98 same as above on win98 Protel AdvPCB (2.8) no klunk Igor- are you using the File (eXit) as prescribed and not the closed window X ? have you pressed the test button for the critical stop in sounds? anyway, having said that, like Ian, i am not sure this really means anything anyway maybe the programmer put that in to warn you were quitting protel and forgot to put it on the big X Dennis Saputelli JaMi Smith wrote: > > Igor, > > Thanks. > > Still kind of curious as to what the difference is in your installation as > opposed to all of the others that have reported it on their systems. > > Well, now that it is Monday in some parts of the world, we may get a few > more responses to the "KLUNK!" posts, and find a few more people who cannot > duplicate the problem on their machine. > > Just to review what we know so far: > > We know it happens with Protel 99 SE on numerous machines in Win2K. > > We know it does not happen with Protel 99 SE on your machine with Win2K. > > We need more input on Protel 99 SE on other systems. > > We have no input for Protel 99 on any systems. > > We know it happens with Protel 98 in Win98. > > We have no input for Protel 98 in Win95 or NT4. > > Thanks again, > > Let me know if you think of something, > > JaMi > > ----- Original Message ----- > From: "Igor Gmitrovic" <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Sunday, September 08, 2002 10:25 PM > Subject: Re: [PEDA] Whats wrong with this picture. > > Jami, > > My setting for the "Critical Stop" shows chord.wav as well. > > Igor > > ************************************************************************ > * Tracking #: 039C0F0E829C9249872B8A388B1D3F456265E6D8 > * > ************************************************************************ -- ___________________________________________________________________________ www.integratedcontrolsinc.com Integrated Controls, Inc. tel: 415-647-0480 2851 21st Street fax: 415-647-3003 San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
