> > At 12:36 PM 28/11/02 +1000, you wrote: > >Hi all: > > > >I usually use a hierarchical structure for my schematic > documents, with a > >main document with all the connectors on it, then below that a block > >diagram, and then the actual circuitry on one or more levels > below that. > > > >I'm currently doing a reasonable-sized board, with lots of > digital lines, > >and have amalgamated those lines into busses for the most part, > > Are these busses made up from dissimilar nets - that is stuff > like nRD, > nWR, nCSRAM all being merged in to a bus called something like > CONTROLS? If so this won't work. Protel can only cope with > busses of the > "standard" form eg D[7..0] and nets D7 down to D0.
A mixture of both; however I'm having just as much trouble on the data bus (TR_D00..TR_D15) as I am on the control busses... Cheers, MvdW > > Ian Wilson > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
