Michael, Make sure your swap file is a minimum of 1GB. I ran it on a 2000 Pro machine and had similar problems until I changed my swap file to 1GB.
Dave Adams Electronics Design Engineer Safco Corporation 5404 Touhy Ave. Skokie, Il 60077 Phone: (847)677-3204 Fax : ( 847)677-4970 Cell: (630)460-3720 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 08, 2003 5:46 AM To: Protel EDA Forum Subject: [PEDA] Protel99SE keeps locking up Hello all, I am running Protel99SE on Win2k Professional, and the machine seems to keep locking up temporarily. The lockups affect the whole machine, last about 5 seconds, and are quite frequent. It seems to happen whilst I am in the middle of doing things, eg placing a track, as opposed to locking between me doing things. Has anybody seen this problem before, or have any ideas how to stop it? It ran fine on my old 95 machine, and runs fine on my collegues 2k machines. Thanks, Mike. Michael Binning Zarlink Semiconductor mailto:[EMAIL PROTECTED] http://www.zarlink.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
