John,
I tried disabling the network card through the device manager, but it did
not stop the lockups.
The Network card is a 3Com as well.
Mike.
"John A. Ross"
<[EMAIL PROTECTED]> To: "Protel EDA Forum"
<[EMAIL PROTECTED]>
cc:
08-Jan-2003 04:57 Subject: Re: [PEDA] Protel99SE keeps
locking up
PM
Please respond to
"Protel EDA
Forum"
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 08, 2003 4:31 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Protel99SE keeps locking up
>
> The odd thing is that the setup I have is nearly the same as
> a collegue, who does not have the same problem.
>
> The only other info I can add is that I am running a P2 and
> see the problem. I have one collegue running a P3 and seeing
> the problem. Everybody else is running P4's, and they don't
> have any problems.
>
> My old setup was on a P2 with Win95, and though it was full
> of bugs, it never froze like this.
Mike, the notebook I see the same symptoms on is a Compaq Armada 7800
PII-366MHz machine and it uses a Netgear PCMCIA NIC. I just tried it
with a 3Com PCMCIA NIC and I do not see the problem on same notebook.
Have you tried just disabling the NIC in your HW profile to seee if the
symptoms go away?
BTW if Gary passes your desk ask him to call me.
Best Regards
John A. Ross
RSD Communications ltd
Email [EMAIL PROTECTED]
WWW http://www.rsd.tv
==================================
>
> Wierd, and annoying.
>
> Mike.
>
>
>
>
>
>
> "Dave Adams"
>
>
> <[EMAIL PROTECTED]> To:
> "'Protel EDA Forum'" <[EMAIL PROTECTED]>
>
> cc:
>
>
> 08-Jan-2003 04:08 Subject: Re:
> [PEDA] Protel99SE keeps locking up
>
> PM
>
>
> Please respond to
>
>
> "Protel EDA
>
>
> Forum"
>
>
>
>
>
>
>
>
>
>
>
>
> Michael,
>
> Make sure your swap file is a minimum of 1GB. I ran it on a
> 2000 Pro machine and had similar problems until I changed my
> swap file to 1GB.
>
> Dave Adams
> Electronics Design Engineer
> Safco Corporation
> 5404 Touhy Ave.
> Skokie, Il 60077
> Phone: (847)677-3204
> Fax : ( 847)677-4970
> Cell: (630)460-3720
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 08, 2003 5:46 AM
> To: Protel EDA Forum
> Subject: [PEDA] Protel99SE keeps locking up
>
>
>
> Hello all,
>
> I am running Protel99SE on Win2k Professional, and the
> machine seems to keep locking up temporarily.
>
> The lockups affect the whole machine, last about 5 seconds,
> and are quite frequent.
>
> It seems to happen whilst I am in the middle of doing things,
> eg placing a track, as opposed to locking between me doing things.
>
> Has anybody seen this problem before, or have any ideas how
> to stop it?
>
> It ran fine on my old 95 machine, and runs fine on my
> collegues 2k machines.
>
> Thanks,
>
> Mike.
>
> Michael Binning
> Zarlink Semiconductor
> mailto:[EMAIL PROTECTED]
> http://www.zarlink.com
>
>
>
>
>
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
