Ah, only saw this after I replied to the previous message. Yeah, go with an enclosure that has both 800 and 400 ports and hook up the interface last.
Slau On Jul 10, 2010, at 5:45 PM, clarence griffin wrote: > oh yeah, and it only has 1 fw 800 port, its the 13 inch model. > > GF > > > On Jul 10, 2010, at 1:58 PM, Slau Halatyn wrote: > >> I don't recall whether you're using a laptop or Mac Pro but, whatever the >> case is, if there's only one FireWire port available on the laptop, you >> absolutely need a chassis with at least 2 FireWire ports and hang the >> control surface off the drive. With FireWire stuff and Pro Tools, the >> interface is always last in the chain. Otherwise, yeah, if it's a MacBook >> Pro with 400 and 800 ports, it's possible to just keep the drive and >> interface on separate busses. Whatever configuration you're using, it should >> be way more than powerful enough to handle a ton of tracks. >> >> Years ago, I did a remote session with an iBook which was only a 600 MHz >> processor and recorded 16 tracks live without any hiccups at all. >> >> Slau >> >> On Jul 10, 2010, at 12:03 PM, clarence griffin wrote: >> >>> ah! thanks. this sounds good. I didn't even think of that. so I need to get >>> a caddy with 2 fw ports on it, then I can connect that to the mac, and the >>> project mix to the drive. >>> Is this correct? I just want to make sure I am understanding you correctly. >>> I think that's right. >>> >>> GF >>> >>> >>> On Jul 10, 2010, at 10:19 AM, Slau Halatyn wrote: >>> >>>> OK, yeah, I see what other people have since commented and, certainly, >>>> stay away from USB and I woldn't at all recommend recording to your >>>> internal drive. Yes, it will work and it'll work for a while but you're >>>> asking for trouble. The way the interface connects is by being the last >>>> item in the FireWire chain. Get a drive with two FireWire ports and >>>> connect computer to drive and drive to interface. The smaller compact >>>> bus-powered drives have fewer options in terms of multiple You'll want to >>>> go with something a bit more substantial. If the computer has a FW 800 >>>> port, you can record to that bus and use the 400 bus just for the >>>> interface. >>>> >>>> HTH, >>>> >>>> Slau >>>> ports. >>>> On Jul 9, 2010, at 8:19 PM, clarence griffin wrote: >>>> >>>>> I disabled the drive I was recording to from the spot light settings. >>>>> Maybe I can't use an external drive? Its USB 2.0. I would think that's >>>>> fast enough. Maybe I need to record to my hard drive? If so. I have a lot >>>>> of clearing out of stuff to do. >>>>> Any suggestions?? >>>>> >>>>> GF >>>>> >>>>> >>>> >>> >> >
