Actually that brings up a question.
Is there therefore no currently support apple desktop or laptop that has fw 400 built in? meaning that some kind of conversion is absolutely required if you are going to use a digi 002 for example?

Karen
On Sat, 10 Jul 2010, Chuck Reichel wrote:

Hi clarence,
I just went through the FW 800 conversion to FW 400 with my Mbox pro 2 and let me tell you the Lacie drive did not work with that combo!!! I ended up getting a 800 to 400 fw pcie card for my Mac pro quad core and then PT saw the Mbox 2 pro finally. If I had to do it over I would have went with a FW 800 to FW 400 conversion cable! No telling if that would have worked either! LOL Now that I have installed my PT HD3 which by the way is just purring along, the pceie 800 to 400 fw card is sitting here in the box!! Any body need a conversion card its on sale!
GROWLLLLLLL.
It may work for you but no guarantee    .
The $29 800 to 400 cable would probably be your most cost effective solution if you only have a 800 port.
talk soon

Chuck Reichel
954-742-0019
www.SoundPictureRecording.com


On Jul 10, 2010, at 5:45 PM, clarence griffin wrote:

oh yeah, and it only has 1 fw 800 port, its the 13 inch model.

GF


On Jul 10, 2010, at 1:58 PM, Slau Halatyn wrote:

> I don't recall whether you're using a laptop or Mac Pro but, whatever the > case is, if there's only one FireWire port available on the laptop, you > absolutely need a chassis with at least 2 FireWire ports and hang the > control surface off the drive. With FireWire stuff and Pro Tools, the > interface is always last in the chain. Otherwise, yeah, if it's a MacBook > Pro with 400 and 800 ports, it's possible to just keep the drive and > interface on separate busses. Whatever configuration you're using, it > should be way more than powerful enough to handle a ton of tracks. > > Years ago, I did a remote session with an iBook which was only a 600 MHz > processor and recorded 16 tracks live without any hiccups at all. > > Slau > > On Jul 10, 2010, at 12:03 PM, clarence griffin wrote: > > > ah! thanks. this sounds good. I didn't even think of that. so I need to > > get a caddy with 2 fw ports on it, then I can connect that to the mac, > > and the project mix to the drive. > > Is this correct? I just want to make sure I am understanding you > > correctly. I think that's right. > > > > GF > > > > > > On Jul 10, 2010, at 10:19 AM, Slau Halatyn wrote: > > > > > OK, yeah, I see what other people have since commented and, > > > certainly, stay away from USB and I woldn't at all recommend > > > recording to your internal drive. Yes, it will work and it'll work > > > for a while but you're asking for trouble. The way the interface > > > connects is by being the last item in the FireWire chain. Get a drive > > > with two FireWire ports and connect computer to drive and drive to > > > interface. The smaller compact bus-powered drives have fewer options > > > in terms of multiple You'll want to go with something a bit more > > > substantial. If the computer has a FW 800 port, you can record to > > > that bus and use the 400 bus just for the interface. > > > > > > HTH, > > > > > > Slau
> > > ports.
> > > On Jul 9, 2010, at 8:19 PM, clarence griffin wrote:
> > > > > > > I disabled the drive I was recording to from the spot light > > > > settings. Maybe I can't use an external drive? Its USB 2.0. I would > > > > think that's fast enough. Maybe I need to record to my hard drive? > > > > If so. I have a lot of clearing out of stuff to do.
> > > > Any suggestions??
> > > > > > > > GF > > > > > > > > > > > > > >

Chuck Reichel
954-742-0019
www.SoundPictureRecording.com




Reply via email to