I just bought a cable that went from 800 to 400. The interface is working fine. 
I'll try to interface it with a drive and see if that works and report back.

Reeves
On Jul 11, 2010, at 7:20 PM, Slau Halatyn wrote:

> Hey Karen,
> 
> No matter what, the standard configuration is to connect a drive to the 
> computer and the interface to the drive. The interface (or control surface) 
> is the last in the chain so even if you have an 800 port, a drive with both 
> ports can accommodate a 400 device.
> 
> HTH,
> 
> Slau
> 
> On Jul 11, 2010, at 7:02 PM, Karen Lewellen wrote:
> 
>> you are suggesting connecting a drive to the digi, which I understood is 
>> also  an fw 400 device, instead of to the mac itself?
>> I am thinking more of the control surface needs than the drive.
>> 
>> On Sun, 11 Jul 2010, Slau Halatyn wrote:
>> 
>>> Hi Karen,
>>> 
>>> I don't know what the current crop of Apple computers have but any drive 
>>> that has both an 800 and a 400 port is capable of interfacing with a Mac 
>>> and any FW 400 device.
>>> 
>>> Slau
>>> 
>>> On Jul 11, 2010, at 5:49 PM, Karen Lewellen wrote:
>>> 
>>>> Actually that brings up a question.
>>>> Is there therefore no currently support apple desktop or laptop that has 
>>>> fw 400  built in? meaning that some kind of conversion is absolutely 
>>>> required if you are going to use a digi 002 for example?
>>>> 
>>>> Karen
>>>> On Sat, 10 Jul 2010, Chuck Reichel wrote:
>>>> 
>>>>> Hi clarence,
>>>>> I just went through the FW 800 conversion to FW 400 with my Mbox pro 2 
>>>>> and let me tell you the Lacie drive did not work with that combo!!!
>>>>> I ended up getting a 800 to 400 fw pcie card for my Mac pro quad core and 
>>>>> then PT saw the Mbox 2 pro finally.
>>>>> If I had to do it over I would have went with a FW 800 to FW 400 
>>>>> conversion cable! No telling if that would have worked either! LOL
>>>>> Now that I have installed my PT HD3 which by the way is just purring 
>>>>> along, the pceie 800 to 400 fw card is sitting here in the box!! Any body 
>>>>> need a conversion card its on sale!
>>>>> GROWLLLLLLL.
>>>>> It may work for you but no guarantee    .
>>>>> The $29 800 to 400 cable would probably  be your most cost effective 
>>>>> solution if you only have a 800 port.
>>>>> talk soon
>>>>> 
>>>>> Chuck Reichel
>>>>> 954-742-0019
>>>>> www.SoundPictureRecording.com
>>>>> 
>>>>> 
>>>>> On Jul 10, 2010, at 5:45 PM, clarence griffin wrote:
>>>>> 
>>>>>> oh yeah, and it only has 1 fw 800 port, its the 13 inch model.
>>>>>> GF
>>>>>> On Jul 10, 2010, at 1:58 PM, Slau Halatyn wrote:
>>>>>>> I don't recall whether you're using a laptop or Mac Pro but, whatever 
>>>>>>> the > case is, if there's only one FireWire port available on the 
>>>>>>> laptop, you > absolutely need a chassis with at least 2 FireWire ports 
>>>>>>> and hang the > control surface off the drive. With FireWire stuff and 
>>>>>>> Pro Tools, the > interface is always last in the chain. Otherwise, 
>>>>>>> yeah, if it's a MacBook > Pro with 400 and 800 ports, it's possible to 
>>>>>>> just keep the drive and > interface on separate busses. Whatever 
>>>>>>> configuration you're using, it > should be way more than powerful 
>>>>>>> enough to handle a ton of tracks.
>>>>>>>> Years ago, I did a remote session with an iBook which was only a 600 
>>>>>>>> MHz > processor and recorded 16 tracks live without any hiccups at all.
>>>>>>>> Slau
>>>>>>>> On Jul 10, 2010, at 12:03 PM, clarence griffin wrote:
>>>>>>>>> ah! thanks. this sounds good. I didn't even think of that. so I need 
>>>>>>>>> to > > get a caddy with 2 fw ports on it, then I can connect that to 
>>>>>>>>> the mac, > > and the project mix to the drive.
>>>>>>>> Is this correct? I just want to make sure I am understanding you > > 
>>>>>>>> correctly. I think that's right.
>>>>>>>>>> GF
>>>>>>>>>>>> On Jul 10, 2010, at 10:19 AM, Slau Halatyn wrote:
>>>>>>>>>>> OK, yeah, I see what other people have since commented and, > > > 
>>>>>>>>>>> certainly, stay away from USB and I woldn't at all recommend > > > 
>>>>>>>>>>> recording to your internal drive. Yes, it will work and it'll work 
>>>>>>>>>>> > > > for a while but you're asking for trouble. The way the 
>>>>>>>>>>> interface > > > connects is by being the last item in the FireWire 
>>>>>>>>>>> chain. Get a drive > > > with two FireWire ports and connect 
>>>>>>>>>>> computer to drive and drive to > > > interface. The smaller compact 
>>>>>>>>>>> bus-powered drives have fewer options > > > in terms of multiple 
>>>>>>>>>>> You'll want to go with something a bit more > > > substantial. If 
>>>>>>>>>>> the computer has a FW 800 port, you can record to > > > that bus 
>>>>>>>>>>> and use the 400 bus just for the interface.
>>>>>>>>>>>> HTH,
>>>>>>>>>>>> Slau
>>>>>>>>> ports.
>>>>>>>>> On Jul 9, 2010, at 8:19 PM, clarence griffin wrote:
>>>>>>>>>>>>> I disabled the drive I was recording to from the spot light > > > 
>>>>>>>>>>>>> > settings. Maybe I can't use an external drive? Its USB 2.0. I 
>>>>>>>>>>>>> would > > > > think that's fast enough. Maybe I need to record to 
>>>>>>>>>>>>> my hard drive? > > > > If so. I have a lot of clearing out of 
>>>>>>>>>>>>> stuff to do.
>>>>>>>>>> Any suggestions??
>>>>>>>>>>>>>> GF
>>>>>>>>>>>>>>>>>>>> 
>>>>> 
>>>>> Chuck Reichel
>>>>> 954-742-0019
>>>>> www.SoundPictureRecording.com
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>> 
>>> 
> 

Reply via email to