Hi Karen,

I don't know what the current crop of Apple computers have but any drive that 
has both an 800 and a 400 port is capable of interfacing with a Mac and any FW 
400 device.

Slau

On Jul 11, 2010, at 5:49 PM, Karen Lewellen wrote:

> Actually that brings up a question.
> Is there therefore no currently support apple desktop or laptop that has fw 
> 400  built in? meaning that some kind of conversion is absolutely required if 
> you are going to use a digi 002 for example?
> 
> Karen
> On Sat, 10 Jul 2010, Chuck Reichel wrote:
> 
>> Hi clarence,
>> I just went through the FW 800 conversion to FW 400 with my Mbox pro 2 and 
>> let me tell you the Lacie drive did not work with that combo!!!
>> I ended up getting a 800 to 400 fw pcie card for my Mac pro quad core and 
>> then PT saw the Mbox 2 pro finally.
>> If I had to do it over I would have went with a FW 800 to FW 400 conversion 
>> cable! No telling if that would have worked either! LOL
>> Now that I have installed my PT HD3 which by the way is just purring along, 
>> the pceie 800 to 400 fw card is sitting here in the box!! Any body need a 
>> conversion card its on sale!
>> GROWLLLLLLL.
>> It may work for you but no guarantee    .
>> The $29 800 to 400 cable would probably  be your most cost effective 
>> solution if you only have a 800 port.
>> talk soon
>> 
>> Chuck Reichel
>> 954-742-0019
>> www.SoundPictureRecording.com
>> 
>> 
>> On Jul 10, 2010, at 5:45 PM, clarence griffin wrote:
>> 
>>> oh yeah, and it only has 1 fw 800 port, its the 13 inch model.
>>> GF
>>> On Jul 10, 2010, at 1:58 PM, Slau Halatyn wrote:
>>> > I don't recall whether you're using a laptop or Mac Pro but, whatever the 
>>> > > case is, if there's only one FireWire port available on the laptop, you 
>>> > > absolutely need a chassis with at least 2 FireWire ports and hang the > 
>>> > control surface off the drive. With FireWire stuff and Pro Tools, the > 
>>> > interface is always last in the chain. Otherwise, yeah, if it's a MacBook 
>>> > > Pro with 400 and 800 ports, it's possible to just keep the drive and > 
>>> > interface on separate busses. Whatever configuration you're using, it > 
>>> > should be way more than powerful enough to handle a ton of tracks.
>>> > > Years ago, I did a remote session with an iBook which was only a 600 
>>> > > MHz > processor and recorded 16 tracks live without any hiccups at all.
>>> > > Slau
>>> > > On Jul 10, 2010, at 12:03 PM, clarence griffin wrote:
>>> > > > ah! thanks. this sounds good. I didn't even think of that. so I need 
>>> > > > to > > get a caddy with 2 fw ports on it, then I can connect that to 
>>> > > > the mac, > > and the project mix to the drive.
>>> > > Is this correct? I just want to make sure I am understanding you > > 
>>> > > correctly. I think that's right.
>>> > > > > GF
>>> > > > > > > On Jul 10, 2010, at 10:19 AM, Slau Halatyn wrote:
>>> > > > > > OK, yeah, I see what other people have since commented and, > > > 
>>> > > > > > certainly, stay away from USB and I woldn't at all recommend > > 
>>> > > > > > > recording to your internal drive. Yes, it will work and it'll 
>>> > > > > > work > > > for a while but you're asking for trouble. The way the 
>>> > > > > > interface > > > connects is by being the last item in the 
>>> > > > > > FireWire chain. Get a drive > > > with two FireWire ports and 
>>> > > > > > connect computer to drive and drive to > > > interface. The 
>>> > > > > > smaller compact bus-powered drives have fewer options > > > in 
>>> > > > > > terms of multiple You'll want to go with something a bit more > > 
>>> > > > > > > substantial. If the computer has a FW 800 port, you can record 
>>> > > > > > to > > > that bus and use the 400 bus just for the interface.
>>> > > > > > > HTH,
>>> > > > > > > Slau
>>> > > > ports.
>>> > > > On Jul 9, 2010, at 8:19 PM, clarence griffin wrote:
>>> > > > > > > > I disabled the drive I was recording to from the spot light > 
>>> > > > > > > > > > > settings. Maybe I can't use an external drive? Its USB 
>>> > > > > > > > 2.0. I would > > > > think that's fast enough. Maybe I need 
>>> > > > > > > > to record to my hard drive? > > > > If so. I have a lot of 
>>> > > > > > > > clearing out of stuff to do.
>>> > > > > Any suggestions??
>>> > > > > > > > > GF
>>> > > > > > > > > > > > > > > 
>> 
>> Chuck Reichel
>> 954-742-0019
>> www.SoundPictureRecording.com
>> 
>> 
>> 
>> 

Reply via email to