Hey Karen,

No matter what, the standard configuration is to connect a drive to the 
computer and the interface to the drive. The interface (or control surface) is 
the last in the chain so even if you have an 800 port, a drive with both ports 
can accommodate a 400 device.

HTH,

Slau

On Jul 11, 2010, at 7:02 PM, Karen Lewellen wrote:

> you are suggesting connecting a drive to the digi, which I understood is also 
>  an fw 400 device, instead of to the mac itself?
> I am thinking more of the control surface needs than the drive.
> 
> On Sun, 11 Jul 2010, Slau Halatyn wrote:
> 
>> Hi Karen,
>> 
>> I don't know what the current crop of Apple computers have but any drive 
>> that has both an 800 and a 400 port is capable of interfacing with a Mac and 
>> any FW 400 device.
>> 
>> Slau
>> 
>> On Jul 11, 2010, at 5:49 PM, Karen Lewellen wrote:
>> 
>>> Actually that brings up a question.
>>> Is there therefore no currently support apple desktop or laptop that has fw 
>>> 400  built in? meaning that some kind of conversion is absolutely required 
>>> if you are going to use a digi 002 for example?
>>> 
>>> Karen
>>> On Sat, 10 Jul 2010, Chuck Reichel wrote:
>>> 
>>>> Hi clarence,
>>>> I just went through the FW 800 conversion to FW 400 with my Mbox pro 2 and 
>>>> let me tell you the Lacie drive did not work with that combo!!!
>>>> I ended up getting a 800 to 400 fw pcie card for my Mac pro quad core and 
>>>> then PT saw the Mbox 2 pro finally.
>>>> If I had to do it over I would have went with a FW 800 to FW 400 
>>>> conversion cable! No telling if that would have worked either! LOL
>>>> Now that I have installed my PT HD3 which by the way is just purring 
>>>> along, the pceie 800 to 400 fw card is sitting here in the box!! Any body 
>>>> need a conversion card its on sale!
>>>> GROWLLLLLLL.
>>>> It may work for you but no guarantee    .
>>>> The $29 800 to 400 cable would probably  be your most cost effective 
>>>> solution if you only have a 800 port.
>>>> talk soon
>>>> 
>>>> Chuck Reichel
>>>> 954-742-0019
>>>> www.SoundPictureRecording.com
>>>> 
>>>> 
>>>> On Jul 10, 2010, at 5:45 PM, clarence griffin wrote:
>>>> 
>>>>> oh yeah, and it only has 1 fw 800 port, its the 13 inch model.
>>>>> GF
>>>>> On Jul 10, 2010, at 1:58 PM, Slau Halatyn wrote:
>>>>>> I don't recall whether you're using a laptop or Mac Pro but, whatever 
>>>>>> the > case is, if there's only one FireWire port available on the 
>>>>>> laptop, you > absolutely need a chassis with at least 2 FireWire ports 
>>>>>> and hang the > control surface off the drive. With FireWire stuff and 
>>>>>> Pro Tools, the > interface is always last in the chain. Otherwise, yeah, 
>>>>>> if it's a MacBook > Pro with 400 and 800 ports, it's possible to just 
>>>>>> keep the drive and > interface on separate busses. Whatever 
>>>>>> configuration you're using, it > should be way more than powerful enough 
>>>>>> to handle a ton of tracks.
>>>>>>> Years ago, I did a remote session with an iBook which was only a 600 
>>>>>>> MHz > processor and recorded 16 tracks live without any hiccups at all.
>>>>>>> Slau
>>>>>>> On Jul 10, 2010, at 12:03 PM, clarence griffin wrote:
>>>>>>>> ah! thanks. this sounds good. I didn't even think of that. so I need 
>>>>>>>> to > > get a caddy with 2 fw ports on it, then I can connect that to 
>>>>>>>> the mac, > > and the project mix to the drive.
>>>>>>> Is this correct? I just want to make sure I am understanding you > > 
>>>>>>> correctly. I think that's right.
>>>>>>>>> GF
>>>>>>>>>>> On Jul 10, 2010, at 10:19 AM, Slau Halatyn wrote:
>>>>>>>>>> OK, yeah, I see what other people have since commented and, > > > 
>>>>>>>>>> certainly, stay away from USB and I woldn't at all recommend > > > 
>>>>>>>>>> recording to your internal drive. Yes, it will work and it'll work > 
>>>>>>>>>> > > for a while but you're asking for trouble. The way the interface 
>>>>>>>>>> > > > connects is by being the last item in the FireWire chain. Get 
>>>>>>>>>> a drive > > > with two FireWire ports and connect computer to drive 
>>>>>>>>>> and drive to > > > interface. The smaller compact bus-powered drives 
>>>>>>>>>> have fewer options > > > in terms of multiple You'll want to go with 
>>>>>>>>>> something a bit more > > > substantial. If the computer has a FW 800 
>>>>>>>>>> port, you can record to > > > that bus and use the 400 bus just for 
>>>>>>>>>> the interface.
>>>>>>>>>>> HTH,
>>>>>>>>>>> Slau
>>>>>>>> ports.
>>>>>>>> On Jul 9, 2010, at 8:19 PM, clarence griffin wrote:
>>>>>>>>>>>> I disabled the drive I was recording to from the spot light > > > 
>>>>>>>>>>>> > settings. Maybe I can't use an external drive? Its USB 2.0. I 
>>>>>>>>>>>> would > > > > think that's fast enough. Maybe I need to record to 
>>>>>>>>>>>> my hard drive? > > > > If so. I have a lot of clearing out of 
>>>>>>>>>>>> stuff to do.
>>>>>>>>> Any suggestions??
>>>>>>>>>>>>> GF
>>>>>>>>>>>>>>>>>>> 
>>>> 
>>>> Chuck Reichel
>>>> 954-742-0019
>>>> www.SoundPictureRecording.com
>>>> 
>>>> 
>>>> 
>>>> 
>> 
>> 

Reply via email to