I've been having the same recording problems. However, I discovered that Pro Tools doesn't work well recording to a 5 and a quarter floppy disk. Hmmm. Wish someone would have told me this before I invested all that money into an apple 2 E. Lolololol.
Reeves On Jul 10, 2010, at 12:03 PM, clarence griffin wrote: > ah! thanks. this sounds good. I didn't even think of that. so I need to get a > caddy with 2 fw ports on it, then I can connect that to the mac, and the > project mix to the drive. > Is this correct? I just want to make sure I am understanding you correctly. I > think that's right. > > GF > > > On Jul 10, 2010, at 10:19 AM, Slau Halatyn wrote: > >> OK, yeah, I see what other people have since commented and, certainly, stay >> away from USB and I woldn't at all recommend recording to your internal >> drive. Yes, it will work and it'll work for a while but you're asking for >> trouble. The way the interface connects is by being the last item in the >> FireWire chain. Get a drive with two FireWire ports and connect computer to >> drive and drive to interface. The smaller compact bus-powered drives have >> fewer options in terms of multiple You'll want to go with something a bit >> more substantial. If the computer has a FW 800 port, you can record to that >> bus and use the 400 bus just for the interface. >> >> HTH, >> >> Slau >> ports. >> On Jul 9, 2010, at 8:19 PM, clarence griffin wrote: >> >>> I disabled the drive I was recording to from the spot light settings. Maybe >>> I can't use an external drive? Its USB 2.0. I would think that's fast >>> enough. Maybe I need to record to my hard drive? If so. I have a lot of >>> clearing out of stuff to do. >>> Any suggestions?? >>> >>> GF >>> >>> >> >
