I know the feeling when your trying to get these set up. I bought a pair and can't get it to fire on number one cylinder. Removed all jets and adjusters and sprayed with cleaner, then swapped for jets from the other side but still can't get it to fire.
On 2 Apr, 21:01, "Paul Slater \(rcracer\)" <[email protected]> wrote: > My DCNF's so far have been a pain, and they aren't even on the engine yet. > So far I can't get one of them apart at all due to one of the screw's being > chewed up by someone & being very tight (it soaking in WD at the moment & I > will try with a impact screwdriver over the next few days). > Second problem is that one of the auxiliary venturi has a crack in it (the > part that sits within the main venture). > The sizes so far are:- > > Main venturi (choke tube) 36 > Aux venturi 4.5 (with one crack and one bent out > of shape slightly) > Emulsion tube f22 > Main jet 115 > Air correction 190 > Starter jet 80f7 > > Tried the local carb specialist who wasn't interested so I'm going to have > to replace the damaged bits before I can even start (that's if I manage to > get the screw out). > It was nice of the seller to tell me they had been stood for 7or8 years > after I had paid but when they were listed as good working order. > > One bit of good news though. The 2+2 passed its MOT and is taxed and on the > road :-) > > Paul > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > > On Behalf Of Robert Craig > Sent: 30 March 2009 09:37 > To: [email protected] > Subject: [Quantum Owners] Re: DCNF CONVERSION UPDATE > > Hi Paul, > Remember to fit a pre filter before the electric fuel pump and regulator. If > > you just fit the carbs with the mechanical fuel pump - chances are that it > won't supply enough fuel. let me know if you need any photos - although I'm > just heading to the airport to fly to OZ for 3 weeks, so might not be able > to reply for a while. > > Good luck (check your jet sizes and choke size before you start and compare > them to Bash's). > > Cheers > > Bob Craig (Q2-267) > ----- Original Message ----- > From: "Paul Slater (rcracer)" <[email protected]> > To: <[email protected]> > Sent: Sunday, March 29, 2009 10:30 PM > Subject: [Quantum Owners] Re: DCNF CONVERSION UPDATE > > I should be having fun fitting some DCNF's sometime soon. I've just won a > set with manifold (from evilbay) so hopefully will be here sometime this > week. > The 2+2 is going in for its MOT on tue/wed so hopefully should be taxed and > tested ready for them to arrive. > > Paul q2 006 > > No virus found in this incoming message. > Checked by AVG -www.avg.com > Version: 8.5.285 / Virus Database: 270.11.31/2029 - Release Date: 03/29/09 > 16:56:00- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
